Build firmware for target without bootloader (#173)

* fixed inline functions for modern C standart

* Build firmware for mcu without bootloader

firmware/targets/f2/STM32L476RGTx_FLASH_NO_BOOT.ld

@@ -0,0 +1,204 @@
+/*
+******************************************************************************
+**
+
+**  File        : LinkerScript.ld
+**
+**  Author		: Auto-generated by System Workbench for STM32
+**
+**  Abstract    : Linker script for STM32L476RGTx series
+**                1024Kbytes FLASH and 128Kbytes RAM
+**
+**                Set heap size, stack size and stack location according
+**                to application requirements.
+**
+**                Set memory bank area and size if external memory is used.
+**
+**  Target      : STMicroelectronics STM32
+**
+**  Distribution: The file is distributed “as is,” without any warranty
+**                of any kind.
+**
+*****************************************************************************
+** @attention
+**
+** <h2><center>&copy; COPYRIGHT(c) 2019 STMicroelectronics</center></h2>
+**
+** Redistribution and use in source and binary forms, with or without modification,
+** are permitted provided that the following conditions are met:
+**   1. Redistributions of source code must retain the above copyright notice,
+**      this list of conditions and the following disclaimer.
+**   2. Redistributions in binary form must reproduce the above copyright notice,
+**      this list of conditions and the following disclaimer in the documentation
+**      and/or other materials provided with the distribution.
+**   3. Neither the name of STMicroelectronics nor the names of its contributors
+**      may be used to endorse or promote products derived from this software
+**      without specific prior written permission.
+**
+** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+**
+*****************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = 0x20018000;    /* end of RAM */
+/* Generate a link error if heap and stack don't fit into RAM */
+_Min_Heap_Size = 0x200;      /* required amount of heap  */
+_Min_Stack_Size = 0x400; /* required amount of stack */
+
+/* Specify the memory areas */
+MEMORY
+{
+RAM (xrw)      : ORIGIN = 0x20000000, LENGTH = 96K
+RAM2 (xrw)      : ORIGIN = 0x10000000, LENGTH = 32K
+FLASH (rx)      : ORIGIN = 0x8000000, LENGTH = 1024K
+}
+
+/* Define output sections */
+SECTIONS
+{
+  /* The startup code goes first into FLASH */
+  .isr_vector :
+  {
+    . = ALIGN(8);
+    KEEP(*(.isr_vector)) /* Startup code */
+    . = ALIGN(8);
+  } >FLASH
+
+  /* The program code and other data goes into FLASH */
+  .text :
+  {
+    . = ALIGN(8);
+    *(.text)           /* .text sections (code) */
+    *(.text*)          /* .text* sections (code) */
+    *(.glue_7)         /* glue arm to thumb code */
+    *(.glue_7t)        /* glue thumb to arm code */
+    *(.eh_frame)
+
+    KEEP (*(.init))
+    KEEP (*(.fini))
+
+    . = ALIGN(8);
+    _etext = .;        /* define a global symbols at end of code */
+  } >FLASH
+
+  /* Constant data goes into FLASH */
+  .rodata :
+  {
+    . = ALIGN(8);
+    *(.rodata)         /* .rodata sections (constants, strings, etc.) */
+    *(.rodata*)        /* .rodata* sections (constants, strings, etc.) */
+    . = ALIGN(8);
+  } >FLASH
+
+  .ARM.extab   : 
+  { 
+  . = ALIGN(8);
+  *(.ARM.extab* .gnu.linkonce.armextab.*)
+  . = ALIGN(8);
+  } >FLASH
+  .ARM : {
+	. = ALIGN(8);
+    __exidx_start = .;
+    *(.ARM.exidx*)
+    __exidx_end = .;
+	. = ALIGN(8);
+  } >FLASH
+
+  .preinit_array     :
+  {
+	. = ALIGN(8);
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array*))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+	. = ALIGN(8);
+  } >FLASH
+  
+  .init_array :
+  {
+	. = ALIGN(8);
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT(.init_array.*)))
+    KEEP (*(.init_array*))
+    PROVIDE_HIDDEN (__init_array_end = .);
+	. = ALIGN(8);
+  } >FLASH
+  .fini_array :
+  {
+	. = ALIGN(8);
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT(.fini_array.*)))
+    KEEP (*(.fini_array*))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+	. = ALIGN(8);
+  } >FLASH
+
+  /* used by the startup to initialize data */
+  _sidata = LOADADDR(.data);
+
+  /* Initialized data sections goes into RAM, load LMA copy after code */
+  .data : 
+  {
+    . = ALIGN(8);
+    _sdata = .;        /* create a global symbol at data start */
+    *(.data)           /* .data sections */
+    *(.data*)          /* .data* sections */
+
+    . = ALIGN(8);
+    _edata = .;        /* define a global symbol at data end */
+  } >RAM AT> FLASH
+
+  
+  /* Uninitialized data section */
+  . = ALIGN(4);
+  .bss :
+  {
+    /* This is used by the startup in order to initialize the .bss secion */
+    _sbss = .;         /* define a global symbol at bss start */
+    __bss_start__ = _sbss;
+    *(.bss)
+    *(.bss*)
+    *(COMMON)
+
+    . = ALIGN(4);
+    _ebss = .;         /* define a global symbol at bss end */
+    __bss_end__ = _ebss;
+  } >RAM
+
+  /* User_heap_stack section, used to check that there is enough RAM left */
+  ._user_heap_stack :
+  {
+    . = ALIGN(8);
+    PROVIDE ( end = . );
+    PROVIDE ( _end = . );
+    . = . + _Min_Heap_Size;
+    . = . + _Min_Stack_Size;
+    . = ALIGN(8);
+  } >RAM
+
+  
+
+  /* Remove information from the standard libraries */
+  /DISCARD/ :
+  {
+    libc.a ( * )
+    libm.a ( * )
+    libgcc.a ( * )
+  }
+
+  .ARM.attributes 0 : { *(.ARM.attributes) }
+}
+
+

firmware/targets/f2/Src/system_stm32l4xx.c

@@ -123,25 +123,32 @@
 /*!< Uncomment the following line if you need to relocate your vector Table in
      Internal SRAM. */
 /* #define VECT_TAB_SRAM */
+
+#ifdef NO_BOOTLOADER
+#define VECT_TAB_OFFSET  0x0000 /*!< Vector Table base offset field.
+                                   This value must be a multiple of 0x200. */
+#else
 #define VECT_TAB_OFFSET  0x8000 /*!< Vector Table base offset field.
                                    This value must be a multiple of 0x200. */
-/******************************************************************************/
+#endif
-/**
+
+    /******************************************************************************/
+    /**
   * @}
   */
 
-/** @addtogroup STM32L4xx_System_Private_Macros
+    /** @addtogroup STM32L4xx_System_Private_Macros
   * @{
   */
 
-/**
+    /**
   * @}
   */
 
-/** @addtogroup STM32L4xx_System_Private_Variables
+    /** @addtogroup STM32L4xx_System_Private_Variables
   * @{
   */
-  /* The SystemCoreClock variable is updated in three ways:
+    /* The SystemCoreClock variable is updated in three ways:
       1) by calling CMSIS function SystemCoreClockUpdate()
       2) by calling HAL API function HAL_RCC_GetHCLKFreq()
       3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
@@ -149,7 +156,7 @@
                is no need to call the 2 first functions listed above, since SystemCoreClock
                variable is updated automatically.
   */
-  uint32_t SystemCoreClock = 4000000U;
+    uint32_t SystemCoreClock = 4000000U;
 
   const uint8_t  AHBPrescTable[16] = {0U, 0U, 0U, 0U, 0U, 0U, 0U, 0U, 1U, 2U, 3U, 4U, 6U, 7U, 8U, 9U};
   const uint8_t  APBPrescTable[8] =  {0U, 0U, 0U, 0U, 1U, 2U, 3U, 4U};

firmware/targets/f2/target.mk

@@ -5,6 +5,15 @@ FW_ADDRESS		= 0x08008000
 OS_OFFSET		= 0x00008000
 FLASH_ADDRESS	= 0x08008000
 
+NO_BOOTLOADER ?= 0
+ifeq ($(NO_BOOTLOADER), 1)
+BOOT_ADDRESS	= 0x08000000
+FW_ADDRESS		= 0x08000000
+OS_OFFSET		= 0x00000000
+FLASH_ADDRESS	= 0x08000000
+CFLAGS			+= -DNO_BOOTLOADER
+endif
+
 BOOT_CFLAGS		= -DBOOT_ADDRESS=$(BOOT_ADDRESS) -DFW_ADDRESS=$(FW_ADDRESS) -DOS_OFFSET=$(OS_OFFSET)
 MCU_FLAGS		= -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard
 
@@ -65,7 +74,12 @@ CFLAGS			+= \
 	-DHAVE_FREERTOS \
 	-DBUTON_INVERT=false \
 	-DDEBUG_UART=huart1
+
+ifeq ($(NO_BOOTLOADER), 1)
+LDFLAGS			+= -T$(TARGET_DIR)/STM32L476RGTx_FLASH_NO_BOOT.ld
+else
 LDFLAGS			+= -T$(TARGET_DIR)/STM32L476RGTx_FLASH.ld
+endif
 
 CFLAGS += \
 	-I$(TARGET_DIR)/Inc \