SubGhz: allow refill attempt at the end of transmission (#1314)
This commit is contained in:
あく
GitHub
parent
b2132b2ec7
commit
fb4d4011f4
@ -1,7 +1,8 @@
|
|||||||
#include "furi_hal_subghz.h"
|
#include "furi_hal_subghz.h"
|
||||||
#include "furi_hal_version.h"
|
#include "furi_hal_subghz_configs.h"
|
||||||
#include "furi_hal_rtc.h"
|
|
||||||
|
|
||||||
|
#include <furi_hal_version.h>
|
||||||
|
#include <furi_hal_rtc.h>
|
||||||
#include <furi_hal_gpio.h>
|
#include <furi_hal_gpio.h>
|
||||||
#include <furi_hal_spi.h>
|
#include <furi_hal_spi.h>
|
||||||
#include <furi_hal_interrupt.h>
|
#include <furi_hal_interrupt.h>
|
||||||
@ -15,317 +16,22 @@
|
|||||||
|
|
||||||
#define TAG "FuriHalSubGhz"
|
#define TAG "FuriHalSubGhz"
|
||||||
|
|
||||||
static volatile SubGhzState furi_hal_subghz_state = SubGhzStateInit;
|
typedef struct {
|
||||||
static volatile SubGhzRegulation furi_hal_subghz_regulation = SubGhzRegulationTxRx;
|
volatile SubGhzState state;
|
||||||
static volatile FuriHalSubGhzPreset furi_hal_subghz_preset = FuriHalSubGhzPresetIDLE;
|
volatile SubGhzRegulation regulation;
|
||||||
|
volatile FuriHalSubGhzPreset preset;
|
||||||
|
} FuriHalSubGhz;
|
||||||
|
|
||||||
static const uint8_t furi_hal_subghz_preset_ook_270khz_async_regs[][2] = {
|
volatile FuriHalSubGhz furi_hal_subghz = {
|
||||||
// https://e2e.ti.com/support/wireless-connectivity/sub-1-ghz-group/sub-1-ghz/f/sub-1-ghz-forum/382066/cc1101---don-t-know-the-correct-registers-configuration
|
.state = SubGhzStateInit,
|
||||||
|
.regulation = SubGhzRegulationTxRx,
|
||||||
/* GPIO GD0 */
|
.preset = FuriHalSubGhzPresetIDLE,
|
||||||
{CC1101_IOCFG0, 0x0D}, // GD0 as async serial data output/input
|
|
||||||
|
|
||||||
/* FIFO and internals */
|
|
||||||
{CC1101_FIFOTHR, 0x47}, // The only important bit is ADC_RETENTION, FIFO Tx=33 Rx=32
|
|
||||||
|
|
||||||
/* Packet engine */
|
|
||||||
{CC1101_PKTCTRL0, 0x32}, // Async, continious, no whitening
|
|
||||||
|
|
||||||
/* Frequency Synthesizer Control */
|
|
||||||
{CC1101_FSCTRL1, 0x06}, // IF = (26*10^6) / (2^10) * 0x06 = 152343.75Hz
|
|
||||||
|
|
||||||
// Modem Configuration
|
|
||||||
{CC1101_MDMCFG0, 0x00}, // Channel spacing is 25kHz
|
|
||||||
{CC1101_MDMCFG1, 0x00}, // Channel spacing is 25kHz
|
|
||||||
{CC1101_MDMCFG2, 0x30}, // Format ASK/OOK, No preamble/sync
|
|
||||||
{CC1101_MDMCFG3, 0x32}, // Data rate is 3.79372 kBaud
|
|
||||||
{CC1101_MDMCFG4, 0x67}, // Rx BW filter is 270.833333kHz
|
|
||||||
|
|
||||||
/* Main Radio Control State Machine */
|
|
||||||
{CC1101_MCSM0, 0x18}, // Autocalibrate on idle-to-rx/tx, PO_TIMEOUT is 64 cycles(149-155us)
|
|
||||||
|
|
||||||
/* Frequency Offset Compensation Configuration */
|
|
||||||
{CC1101_FOCCFG,
|
|
||||||
0x18}, // no frequency offset compensation, POST_K same as PRE_K, PRE_K is 4K, GATE is off
|
|
||||||
|
|
||||||
/* Automatic Gain Control */
|
|
||||||
{CC1101_AGCCTRL0,
|
|
||||||
0x40}, // 01 - Low hysteresis, small asymmetric dead zone, medium gain; 00 - 8 samples agc; 00 - Normal AGC, 00 - 4dB boundary
|
|
||||||
{CC1101_AGCCTRL1,
|
|
||||||
0x00}, // 0; 0 - LNA 2 gain is decreased to minimum before decreasing LNA gain; 00 - Relative carrier sense threshold disabled; 0000 - RSSI to MAIN_TARGET
|
|
||||||
{CC1101_AGCCTRL2, 0x03}, // 00 - DVGA all; 000 - MAX LNA+LNA2; 011 - MAIN_TARGET 24 dB
|
|
||||||
|
|
||||||
/* Wake on radio and timeouts control */
|
|
||||||
{CC1101_WORCTRL, 0xFB}, // WOR_RES is 2^15 periods (0.91 - 0.94 s) 16.5 - 17.2 hours
|
|
||||||
|
|
||||||
/* Frontend configuration */
|
|
||||||
{CC1101_FREND0, 0x11}, // Adjusts current TX LO buffer + high is PATABLE[1]
|
|
||||||
{CC1101_FREND1, 0xB6}, //
|
|
||||||
|
|
||||||
/* End */
|
|
||||||
{0, 0},
|
|
||||||
};
|
};
|
||||||
|
|
||||||
static const uint8_t furi_hal_subghz_preset_ook_650khz_async_regs[][2] = {
|
|
||||||
// https://e2e.ti.com/support/wireless-connectivity/sub-1-ghz-group/sub-1-ghz/f/sub-1-ghz-forum/382066/cc1101---don-t-know-the-correct-registers-configuration
|
|
||||||
|
|
||||||
/* GPIO GD0 */
|
|
||||||
{CC1101_IOCFG0, 0x0D}, // GD0 as async serial data output/input
|
|
||||||
|
|
||||||
/* FIFO and internals */
|
|
||||||
{CC1101_FIFOTHR, 0x07}, // The only important bit is ADC_RETENTION
|
|
||||||
|
|
||||||
/* Packet engine */
|
|
||||||
{CC1101_PKTCTRL0, 0x32}, // Async, continious, no whitening
|
|
||||||
|
|
||||||
/* Frequency Synthesizer Control */
|
|
||||||
{CC1101_FSCTRL1, 0x06}, // IF = (26*10^6) / (2^10) * 0x06 = 152343.75Hz
|
|
||||||
|
|
||||||
// Modem Configuration
|
|
||||||
{CC1101_MDMCFG0, 0x00}, // Channel spacing is 25kHz
|
|
||||||
{CC1101_MDMCFG1, 0x00}, // Channel spacing is 25kHz
|
|
||||||
{CC1101_MDMCFG2, 0x30}, // Format ASK/OOK, No preamble/sync
|
|
||||||
{CC1101_MDMCFG3, 0x32}, // Data rate is 3.79372 kBaud
|
|
||||||
{CC1101_MDMCFG4, 0x17}, // Rx BW filter is 650.000kHz
|
|
||||||
|
|
||||||
/* Main Radio Control State Machine */
|
|
||||||
{CC1101_MCSM0, 0x18}, // Autocalibrate on idle-to-rx/tx, PO_TIMEOUT is 64 cycles(149-155us)
|
|
||||||
|
|
||||||
/* Frequency Offset Compensation Configuration */
|
|
||||||
{CC1101_FOCCFG,
|
|
||||||
0x18}, // no frequency offset compensation, POST_K same as PRE_K, PRE_K is 4K, GATE is off
|
|
||||||
|
|
||||||
/* Automatic Gain Control */
|
|
||||||
// {CC1101_AGCTRL0,0x40}, // 01 - Low hysteresis, small asymmetric dead zone, medium gain; 00 - 8 samples agc; 00 - Normal AGC, 00 - 4dB boundary
|
|
||||||
// {CC1101_AGCTRL1,0x00}, // 0; 0 - LNA 2 gain is decreased to minimum before decreasing LNA gain; 00 - Relative carrier sense threshold disabled; 0000 - RSSI to MAIN_TARGET
|
|
||||||
// {CC1101_AGCCTRL2, 0x03}, // 00 - DVGA all; 000 - MAX LNA+LNA2; 011 - MAIN_TARGET 24 dB
|
|
||||||
//MAGN_TARGET for RX filter BW =< 100 kHz is 0x3. For higher RX filter BW's MAGN_TARGET is 0x7.
|
|
||||||
{CC1101_AGCCTRL0,
|
|
||||||
0x91}, // 10 - Medium hysteresis, medium asymmetric dead zone, medium gain ; 01 - 16 samples agc; 00 - Normal AGC, 01 - 8dB boundary
|
|
||||||
{CC1101_AGCCTRL1,
|
|
||||||
0x0}, // 0; 0 - LNA 2 gain is decreased to minimum before decreasing LNA gain; 00 - Relative carrier sense threshold disabled; 0000 - RSSI to MAIN_TARGET
|
|
||||||
{CC1101_AGCCTRL2, 0x07}, // 00 - DVGA all; 000 - MAX LNA+LNA2; 111 - MAIN_TARGET 42 dB
|
|
||||||
|
|
||||||
/* Wake on radio and timeouts control */
|
|
||||||
{CC1101_WORCTRL, 0xFB}, // WOR_RES is 2^15 periods (0.91 - 0.94 s) 16.5 - 17.2 hours
|
|
||||||
|
|
||||||
/* Frontend configuration */
|
|
||||||
{CC1101_FREND0, 0x11}, // Adjusts current TX LO buffer + high is PATABLE[1]
|
|
||||||
{CC1101_FREND1, 0xB6}, //
|
|
||||||
|
|
||||||
/* End */
|
|
||||||
{0, 0},
|
|
||||||
};
|
|
||||||
static const uint8_t furi_hal_subghz_preset_2fsk_dev2_38khz_async_regs[][2] = {
|
|
||||||
|
|
||||||
/* GPIO GD0 */
|
|
||||||
{CC1101_IOCFG0, 0x0D}, // GD0 as async serial data output/input
|
|
||||||
|
|
||||||
/* Frequency Synthesizer Control */
|
|
||||||
{CC1101_FSCTRL1, 0x06}, // IF = (26*10^6) / (2^10) * 0x06 = 152343.75Hz
|
|
||||||
|
|
||||||
/* Packet engine */
|
|
||||||
{CC1101_PKTCTRL0, 0x32}, // Async, continious, no whitening
|
|
||||||
{CC1101_PKTCTRL1, 0x04},
|
|
||||||
|
|
||||||
// // Modem Configuration
|
|
||||||
{CC1101_MDMCFG0, 0x00},
|
|
||||||
{CC1101_MDMCFG1, 0x02},
|
|
||||||
{CC1101_MDMCFG2, 0x04}, // Format 2-FSK/FM, No preamble/sync, Disable (current optimized)
|
|
||||||
{CC1101_MDMCFG3, 0x83}, // Data rate is 4.79794 kBaud
|
|
||||||
{CC1101_MDMCFG4, 0x67}, //Rx BW filter is 270.833333 kHz
|
|
||||||
{CC1101_DEVIATN, 0x04}, //Deviation 2.380371 kHz
|
|
||||||
|
|
||||||
/* Main Radio Control State Machine */
|
|
||||||
{CC1101_MCSM0, 0x18}, // Autocalibrate on idle-to-rx/tx, PO_TIMEOUT is 64 cycles(149-155us)
|
|
||||||
|
|
||||||
/* Frequency Offset Compensation Configuration */
|
|
||||||
{CC1101_FOCCFG,
|
|
||||||
0x16}, // no frequency offset compensation, POST_K same as PRE_K, PRE_K is 4K, GATE is off
|
|
||||||
|
|
||||||
/* Automatic Gain Control */
|
|
||||||
{CC1101_AGCCTRL0,
|
|
||||||
0x91}, //10 - Medium hysteresis, medium asymmetric dead zone, medium gain ; 01 - 16 samples agc; 00 - Normal AGC, 01 - 8dB boundary
|
|
||||||
{CC1101_AGCCTRL1,
|
|
||||||
0x00}, // 0; 0 - LNA 2 gain is decreased to minimum before decreasing LNA gain; 00 - Relative carrier sense threshold disabled; 0000 - RSSI to MAIN_TARGET
|
|
||||||
{CC1101_AGCCTRL2, 0x07}, // 00 - DVGA all; 000 - MAX LNA+LNA2; 111 - MAIN_TARGET 42 dB
|
|
||||||
|
|
||||||
/* Wake on radio and timeouts control */
|
|
||||||
{CC1101_WORCTRL, 0xFB}, // WOR_RES is 2^15 periods (0.91 - 0.94 s) 16.5 - 17.2 hours
|
|
||||||
|
|
||||||
/* Frontend configuration */
|
|
||||||
{CC1101_FREND0, 0x10}, // Adjusts current TX LO buffer
|
|
||||||
{CC1101_FREND1, 0x56},
|
|
||||||
|
|
||||||
/* End */
|
|
||||||
{0, 0},
|
|
||||||
};
|
|
||||||
static const uint8_t furi_hal_subghz_preset_2fsk_dev47_6khz_async_regs[][2] = {
|
|
||||||
|
|
||||||
/* GPIO GD0 */
|
|
||||||
{CC1101_IOCFG0, 0x0D}, // GD0 as async serial data output/input
|
|
||||||
|
|
||||||
/* Frequency Synthesizer Control */
|
|
||||||
{CC1101_FSCTRL1, 0x06}, // IF = (26*10^6) / (2^10) * 0x06 = 152343.75Hz
|
|
||||||
|
|
||||||
/* Packet engine */
|
|
||||||
{CC1101_PKTCTRL0, 0x32}, // Async, continious, no whitening
|
|
||||||
{CC1101_PKTCTRL1, 0x04},
|
|
||||||
|
|
||||||
// // Modem Configuration
|
|
||||||
{CC1101_MDMCFG0, 0x00},
|
|
||||||
{CC1101_MDMCFG1, 0x02},
|
|
||||||
{CC1101_MDMCFG2, 0x04}, // Format 2-FSK/FM, No preamble/sync, Disable (current optimized)
|
|
||||||
{CC1101_MDMCFG3, 0x83}, // Data rate is 4.79794 kBaud
|
|
||||||
{CC1101_MDMCFG4, 0x67}, //Rx BW filter is 270.833333 kHz
|
|
||||||
{CC1101_DEVIATN, 0x47}, //Deviation 47.60742 kHz
|
|
||||||
|
|
||||||
/* Main Radio Control State Machine */
|
|
||||||
{CC1101_MCSM0, 0x18}, // Autocalibrate on idle-to-rx/tx, PO_TIMEOUT is 64 cycles(149-155us)
|
|
||||||
|
|
||||||
/* Frequency Offset Compensation Configuration */
|
|
||||||
{CC1101_FOCCFG,
|
|
||||||
0x16}, // no frequency offset compensation, POST_K same as PRE_K, PRE_K is 4K, GATE is off
|
|
||||||
|
|
||||||
/* Automatic Gain Control */
|
|
||||||
{CC1101_AGCCTRL0,
|
|
||||||
0x91}, //10 - Medium hysteresis, medium asymmetric dead zone, medium gain ; 01 - 16 samples agc; 00 - Normal AGC, 01 - 8dB boundary
|
|
||||||
{CC1101_AGCCTRL1,
|
|
||||||
0x00}, // 0; 0 - LNA 2 gain is decreased to minimum before decreasing LNA gain; 00 - Relative carrier sense threshold disabled; 0000 - RSSI to MAIN_TARGET
|
|
||||||
{CC1101_AGCCTRL2, 0x07}, // 00 - DVGA all; 000 - MAX LNA+LNA2; 111 - MAIN_TARGET 42 dB
|
|
||||||
|
|
||||||
/* Wake on radio and timeouts control */
|
|
||||||
{CC1101_WORCTRL, 0xFB}, // WOR_RES is 2^15 periods (0.91 - 0.94 s) 16.5 - 17.2 hours
|
|
||||||
|
|
||||||
/* Frontend configuration */
|
|
||||||
{CC1101_FREND0, 0x10}, // Adjusts current TX LO buffer
|
|
||||||
{CC1101_FREND1, 0x56},
|
|
||||||
|
|
||||||
/* End */
|
|
||||||
{0, 0},
|
|
||||||
};
|
|
||||||
static const uint8_t furi_hal_subghz_preset_msk_99_97kb_async_regs[][2] = {
|
|
||||||
/* GPIO GD0 */
|
|
||||||
{CC1101_IOCFG0, 0x06},
|
|
||||||
|
|
||||||
{CC1101_FIFOTHR, 0x07}, // The only important bit is ADC_RETENTION
|
|
||||||
{CC1101_SYNC1, 0x46},
|
|
||||||
{CC1101_SYNC0, 0x4C},
|
|
||||||
{CC1101_ADDR, 0x00},
|
|
||||||
{CC1101_PKTLEN, 0x00},
|
|
||||||
{CC1101_CHANNR, 0x00},
|
|
||||||
|
|
||||||
{CC1101_PKTCTRL0, 0x05},
|
|
||||||
|
|
||||||
{CC1101_FSCTRL0, 0x23},
|
|
||||||
{CC1101_FSCTRL1, 0x06},
|
|
||||||
|
|
||||||
{CC1101_MDMCFG0, 0xF8},
|
|
||||||
{CC1101_MDMCFG1, 0x22},
|
|
||||||
{CC1101_MDMCFG2, 0x72},
|
|
||||||
{CC1101_MDMCFG3, 0xF8},
|
|
||||||
{CC1101_MDMCFG4, 0x5B},
|
|
||||||
{CC1101_DEVIATN, 0x47},
|
|
||||||
|
|
||||||
{CC1101_MCSM0, 0x18},
|
|
||||||
{CC1101_FOCCFG, 0x16},
|
|
||||||
|
|
||||||
{CC1101_AGCCTRL0, 0xB2},
|
|
||||||
{CC1101_AGCCTRL1, 0x00},
|
|
||||||
{CC1101_AGCCTRL2, 0xC7},
|
|
||||||
|
|
||||||
{CC1101_FREND0, 0x10},
|
|
||||||
{CC1101_FREND1, 0x56},
|
|
||||||
|
|
||||||
{CC1101_BSCFG, 0x1C},
|
|
||||||
{CC1101_FSTEST, 0x59},
|
|
||||||
|
|
||||||
/* End */
|
|
||||||
{0, 0},
|
|
||||||
};
|
|
||||||
static const uint8_t furi_hal_subghz_preset_gfsk_9_99kb_async_regs[][2] = {
|
|
||||||
|
|
||||||
{CC1101_IOCFG0, 0x06}, //GDO0 Output Pin Configuration
|
|
||||||
{CC1101_FIFOTHR, 0x47}, //RX FIFO and TX FIFO Thresholds
|
|
||||||
|
|
||||||
//1 : CRC calculation in TX and CRC check in RX enabled,
|
|
||||||
//1 : Variable packet length mode. Packet length configured by the first byte after sync word
|
|
||||||
{CC1101_PKTCTRL0, 0x05},
|
|
||||||
|
|
||||||
{CC1101_FSCTRL1, 0x06}, //Frequency Synthesizer Control
|
|
||||||
|
|
||||||
{CC1101_SYNC1, 0x46},
|
|
||||||
{CC1101_SYNC0, 0x4C},
|
|
||||||
{CC1101_ADDR, 0x00},
|
|
||||||
{CC1101_PKTLEN, 0x00},
|
|
||||||
|
|
||||||
{CC1101_MDMCFG4, 0xC8}, //Modem Configuration 9.99
|
|
||||||
{CC1101_MDMCFG3, 0x93}, //Modem Configuration
|
|
||||||
{CC1101_MDMCFG2, 0x12}, // 2: 16/16 sync word bits detected
|
|
||||||
|
|
||||||
{CC1101_DEVIATN, 0x34}, //Deviation = 19.042969
|
|
||||||
{CC1101_MCSM0, 0x18}, //Main Radio Control State Machine Configuration
|
|
||||||
{CC1101_FOCCFG, 0x16}, //Frequency Offset Compensation Configuration
|
|
||||||
|
|
||||||
{CC1101_AGCCTRL2, 0x43}, //AGC Control
|
|
||||||
{CC1101_AGCCTRL1, 0x40},
|
|
||||||
{CC1101_AGCCTRL0, 0x91},
|
|
||||||
|
|
||||||
{CC1101_WORCTRL, 0xFB}, //Wake On Radio Control
|
|
||||||
/* End */
|
|
||||||
{0, 0},
|
|
||||||
};
|
|
||||||
|
|
||||||
static const uint8_t furi_hal_subghz_preset_ook_async_patable[8] = {
|
|
||||||
0x00,
|
|
||||||
0xC0, // 12dBm 0xC0, 10dBm 0xC5, 7dBm 0xCD, 5dBm 0x86, 0dBm 0x50, -6dBm 0x37, -10dBm 0x26, -15dBm 0x1D, -20dBm 0x17, -30dBm 0x03
|
|
||||||
0x00,
|
|
||||||
0x00,
|
|
||||||
0x00,
|
|
||||||
0x00,
|
|
||||||
0x00,
|
|
||||||
0x00};
|
|
||||||
static const uint8_t furi_hal_subghz_preset_ook_async_patable_au[8] = {
|
|
||||||
0x00,
|
|
||||||
0x37, // 12dBm 0xC0, 10dBm 0xC5, 7dBm 0xCD, 5dBm 0x86, 0dBm 0x50, -6dBm 0x37, -10dBm 0x26, -15dBm 0x1D, -20dBm 0x17, -30dBm 0x03
|
|
||||||
0x00,
|
|
||||||
0x00,
|
|
||||||
0x00,
|
|
||||||
0x00,
|
|
||||||
0x00,
|
|
||||||
0x00};
|
|
||||||
static const uint8_t furi_hal_subghz_preset_2fsk_async_patable[8] = {
|
|
||||||
0xC0, // 10dBm 0xC0, 7dBm 0xC8, 5dBm 0x84, 0dBm 0x60, -10dBm 0x34, -15dBm 0x1D, -20dBm 0x0E, -30dBm 0x12
|
|
||||||
0x00,
|
|
||||||
0x00,
|
|
||||||
0x00,
|
|
||||||
0x00,
|
|
||||||
0x00,
|
|
||||||
0x00,
|
|
||||||
0x00};
|
|
||||||
static const uint8_t furi_hal_subghz_preset_msk_async_patable[8] = {
|
|
||||||
0xC0, // 10dBm 0xC0, 7dBm 0xC8, 5dBm 0x84, 0dBm 0x60, -10dBm 0x34, -15dBm 0x1D, -20dBm 0x0E, -30dBm 0x12
|
|
||||||
0x00,
|
|
||||||
0x00,
|
|
||||||
0x00,
|
|
||||||
0x00,
|
|
||||||
0x00,
|
|
||||||
0x00,
|
|
||||||
0x00};
|
|
||||||
static const uint8_t furi_hal_subghz_preset_gfsk_async_patable[8] = {
|
|
||||||
0xC0, // 10dBm 0xC0, 7dBm 0xC8, 5dBm 0x84, 0dBm 0x60, -10dBm 0x34, -15dBm 0x1D, -20dBm 0x0E, -30dBm 0x12
|
|
||||||
0x00,
|
|
||||||
0x00,
|
|
||||||
0x00,
|
|
||||||
0x00,
|
|
||||||
0x00,
|
|
||||||
0x00,
|
|
||||||
0x00};
|
|
||||||
|
|
||||||
void furi_hal_subghz_init() {
|
void furi_hal_subghz_init() {
|
||||||
furi_assert(furi_hal_subghz_state == SubGhzStateInit);
|
furi_assert(furi_hal_subghz.state == SubGhzStateInit);
|
||||||
furi_hal_subghz_state = SubGhzStateIdle;
|
furi_hal_subghz.state = SubGhzStateIdle;
|
||||||
furi_hal_subghz_preset = FuriHalSubGhzPresetIDLE;
|
furi_hal_subghz.preset = FuriHalSubGhzPresetIDLE;
|
||||||
|
|
||||||
furi_hal_spi_acquire(&furi_hal_spi_bus_handle_subghz);
|
furi_hal_spi_acquire(&furi_hal_spi_bus_handle_subghz);
|
||||||
|
|
||||||
@ -368,7 +74,7 @@ void furi_hal_subghz_init() {
|
|||||||
}
|
}
|
||||||
|
|
||||||
void furi_hal_subghz_sleep() {
|
void furi_hal_subghz_sleep() {
|
||||||
furi_assert(furi_hal_subghz_state == SubGhzStateIdle);
|
furi_assert(furi_hal_subghz.state == SubGhzStateIdle);
|
||||||
furi_hal_spi_acquire(&furi_hal_spi_bus_handle_subghz);
|
furi_hal_spi_acquire(&furi_hal_spi_bus_handle_subghz);
|
||||||
|
|
||||||
cc1101_switch_to_idle(&furi_hal_spi_bus_handle_subghz);
|
cc1101_switch_to_idle(&furi_hal_spi_bus_handle_subghz);
|
||||||
@ -380,7 +86,7 @@ void furi_hal_subghz_sleep() {
|
|||||||
|
|
||||||
furi_hal_spi_release(&furi_hal_spi_bus_handle_subghz);
|
furi_hal_spi_release(&furi_hal_spi_bus_handle_subghz);
|
||||||
|
|
||||||
furi_hal_subghz_preset = FuriHalSubGhzPresetIDLE;
|
furi_hal_subghz.preset = FuriHalSubGhzPresetIDLE;
|
||||||
}
|
}
|
||||||
|
|
||||||
void furi_hal_subghz_dump_state() {
|
void furi_hal_subghz_dump_state() {
|
||||||
@ -414,7 +120,7 @@ void furi_hal_subghz_load_preset(FuriHalSubGhzPreset preset) {
|
|||||||
} else {
|
} else {
|
||||||
furi_crash("SubGhz: Missing config.");
|
furi_crash("SubGhz: Missing config.");
|
||||||
}
|
}
|
||||||
furi_hal_subghz_preset = preset;
|
furi_hal_subghz.preset = preset;
|
||||||
}
|
}
|
||||||
|
|
||||||
void furi_hal_subghz_load_registers(const uint8_t data[][2]) {
|
void furi_hal_subghz_load_registers(const uint8_t data[][2]) {
|
||||||
@ -515,7 +221,7 @@ void furi_hal_subghz_rx() {
|
|||||||
}
|
}
|
||||||
|
|
||||||
bool furi_hal_subghz_tx() {
|
bool furi_hal_subghz_tx() {
|
||||||
if(furi_hal_subghz_regulation != SubGhzRegulationTxRx) return false;
|
if(furi_hal_subghz.regulation != SubGhzRegulationTxRx) return false;
|
||||||
furi_hal_spi_acquire(&furi_hal_spi_bus_handle_subghz);
|
furi_hal_spi_acquire(&furi_hal_spi_bus_handle_subghz);
|
||||||
cc1101_switch_to_tx(&furi_hal_spi_bus_handle_subghz);
|
cc1101_switch_to_tx(&furi_hal_spi_bus_handle_subghz);
|
||||||
furi_hal_spi_release(&furi_hal_spi_bus_handle_subghz);
|
furi_hal_spi_release(&furi_hal_spi_bus_handle_subghz);
|
||||||
@ -589,8 +295,8 @@ bool furi_hal_subghz_is_tx_allowed(uint32_t value) {
|
|||||||
} else {
|
} else {
|
||||||
if(furi_hal_rtc_is_flag_set(FuriHalRtcFlagDebug)) {
|
if(furi_hal_rtc_is_flag_set(FuriHalRtcFlagDebug)) {
|
||||||
if((value >= 304100000 && value <= 321950000) &&
|
if((value >= 304100000 && value <= 321950000) &&
|
||||||
((furi_hal_subghz_preset == FuriHalSubGhzPresetOok270Async) ||
|
((furi_hal_subghz.preset == FuriHalSubGhzPresetOok270Async) ||
|
||||||
(furi_hal_subghz_preset == FuriHalSubGhzPresetOok650Async))) {
|
(furi_hal_subghz.preset == FuriHalSubGhzPresetOok650Async))) {
|
||||||
furi_hal_subghz_load_patable(furi_hal_subghz_preset_ook_async_patable_au);
|
furi_hal_subghz_load_patable(furi_hal_subghz_preset_ook_async_patable_au);
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
@ -615,9 +321,9 @@ bool furi_hal_subghz_is_tx_allowed(uint32_t value) {
|
|||||||
|
|
||||||
uint32_t furi_hal_subghz_set_frequency(uint32_t value) {
|
uint32_t furi_hal_subghz_set_frequency(uint32_t value) {
|
||||||
if(furi_hal_subghz_is_tx_allowed(value)) {
|
if(furi_hal_subghz_is_tx_allowed(value)) {
|
||||||
furi_hal_subghz_regulation = SubGhzRegulationTxRx;
|
furi_hal_subghz.regulation = SubGhzRegulationTxRx;
|
||||||
} else {
|
} else {
|
||||||
furi_hal_subghz_regulation = SubGhzRegulationOnlyRx;
|
furi_hal_subghz.regulation = SubGhzRegulationOnlyRx;
|
||||||
}
|
}
|
||||||
|
|
||||||
furi_hal_spi_acquire(&furi_hal_spi_bus_handle_subghz);
|
furi_hal_spi_acquire(&furi_hal_spi_bus_handle_subghz);
|
||||||
@ -684,8 +390,8 @@ static void furi_hal_subghz_capture_ISR() {
|
|||||||
}
|
}
|
||||||
|
|
||||||
void furi_hal_subghz_start_async_rx(FuriHalSubGhzCaptureCallback callback, void* context) {
|
void furi_hal_subghz_start_async_rx(FuriHalSubGhzCaptureCallback callback, void* context) {
|
||||||
furi_assert(furi_hal_subghz_state == SubGhzStateIdle);
|
furi_assert(furi_hal_subghz.state == SubGhzStateIdle);
|
||||||
furi_hal_subghz_state = SubGhzStateAsyncRx;
|
furi_hal_subghz.state = SubGhzStateAsyncRx;
|
||||||
|
|
||||||
furi_hal_subghz_capture_callback = callback;
|
furi_hal_subghz_capture_callback = callback;
|
||||||
furi_hal_subghz_capture_callback_context = context;
|
furi_hal_subghz_capture_callback_context = context;
|
||||||
@ -741,8 +447,8 @@ void furi_hal_subghz_start_async_rx(FuriHalSubGhzCaptureCallback callback, void*
|
|||||||
}
|
}
|
||||||
|
|
||||||
void furi_hal_subghz_stop_async_rx() {
|
void furi_hal_subghz_stop_async_rx() {
|
||||||
furi_assert(furi_hal_subghz_state == SubGhzStateAsyncRx);
|
furi_assert(furi_hal_subghz.state == SubGhzStateAsyncRx);
|
||||||
furi_hal_subghz_state = SubGhzStateIdle;
|
furi_hal_subghz.state = SubGhzStateIdle;
|
||||||
|
|
||||||
// Shutdown radio
|
// Shutdown radio
|
||||||
furi_hal_subghz_idle();
|
furi_hal_subghz_idle();
|
||||||
@ -822,7 +528,10 @@ static void furi_hal_subghz_async_tx_refill(uint32_t* buffer, size_t samples) {
|
|||||||
}
|
}
|
||||||
|
|
||||||
static void furi_hal_subghz_async_tx_dma_isr() {
|
static void furi_hal_subghz_async_tx_dma_isr() {
|
||||||
furi_assert(furi_hal_subghz_state == SubGhzStateAsyncTx);
|
furi_assert(
|
||||||
|
furi_hal_subghz.state == SubGhzStateAsyncTx ||
|
||||||
|
furi_hal_subghz.state == SubGhzStateAsyncTxEnd ||
|
||||||
|
furi_hal_subghz.state == SubGhzStateAsyncTxLast);
|
||||||
if(LL_DMA_IsActiveFlag_HT1(DMA1)) {
|
if(LL_DMA_IsActiveFlag_HT1(DMA1)) {
|
||||||
LL_DMA_ClearFlag_HT1(DMA1);
|
LL_DMA_ClearFlag_HT1(DMA1);
|
||||||
furi_hal_subghz_async_tx_refill(
|
furi_hal_subghz_async_tx_refill(
|
||||||
@ -840,12 +549,12 @@ static void furi_hal_subghz_async_tx_timer_isr() {
|
|||||||
if(LL_TIM_IsActiveFlag_UPDATE(TIM2)) {
|
if(LL_TIM_IsActiveFlag_UPDATE(TIM2)) {
|
||||||
LL_TIM_ClearFlag_UPDATE(TIM2);
|
LL_TIM_ClearFlag_UPDATE(TIM2);
|
||||||
if(LL_TIM_GetAutoReload(TIM2) == 0) {
|
if(LL_TIM_GetAutoReload(TIM2) == 0) {
|
||||||
if(furi_hal_subghz_state == SubGhzStateAsyncTx) {
|
if(furi_hal_subghz.state == SubGhzStateAsyncTx) {
|
||||||
furi_hal_subghz_state = SubGhzStateAsyncTxLast;
|
furi_hal_subghz.state = SubGhzStateAsyncTxLast;
|
||||||
//forcibly pulls the pin to the ground so that there is no carrier
|
//forcibly pulls the pin to the ground so that there is no carrier
|
||||||
furi_hal_gpio_init(&gpio_cc1101_g0, GpioModeInput, GpioPullDown, GpioSpeedLow);
|
furi_hal_gpio_init(&gpio_cc1101_g0, GpioModeInput, GpioPullDown, GpioSpeedLow);
|
||||||
} else {
|
} else {
|
||||||
furi_hal_subghz_state = SubGhzStateAsyncTxEnd;
|
furi_hal_subghz.state = SubGhzStateAsyncTxEnd;
|
||||||
LL_TIM_DisableCounter(TIM2);
|
LL_TIM_DisableCounter(TIM2);
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
@ -853,16 +562,16 @@ static void furi_hal_subghz_async_tx_timer_isr() {
|
|||||||
}
|
}
|
||||||
|
|
||||||
bool furi_hal_subghz_start_async_tx(FuriHalSubGhzAsyncTxCallback callback, void* context) {
|
bool furi_hal_subghz_start_async_tx(FuriHalSubGhzAsyncTxCallback callback, void* context) {
|
||||||
furi_assert(furi_hal_subghz_state == SubGhzStateIdle);
|
furi_assert(furi_hal_subghz.state == SubGhzStateIdle);
|
||||||
furi_assert(callback);
|
furi_assert(callback);
|
||||||
|
|
||||||
//If transmission is prohibited by regional settings
|
//If transmission is prohibited by regional settings
|
||||||
if(furi_hal_subghz_regulation != SubGhzRegulationTxRx) return false;
|
if(furi_hal_subghz.regulation != SubGhzRegulationTxRx) return false;
|
||||||
|
|
||||||
furi_hal_subghz_async_tx.callback = callback;
|
furi_hal_subghz_async_tx.callback = callback;
|
||||||
furi_hal_subghz_async_tx.callback_context = context;
|
furi_hal_subghz_async_tx.callback_context = context;
|
||||||
|
|
||||||
furi_hal_subghz_state = SubGhzStateAsyncTx;
|
furi_hal_subghz.state = SubGhzStateAsyncTx;
|
||||||
|
|
||||||
furi_hal_subghz_async_tx.duty_low = 0;
|
furi_hal_subghz_async_tx.duty_low = 0;
|
||||||
furi_hal_subghz_async_tx.duty_high = 0;
|
furi_hal_subghz_async_tx.duty_high = 0;
|
||||||
@ -935,14 +644,14 @@ bool furi_hal_subghz_start_async_tx(FuriHalSubGhzAsyncTxCallback callback, void*
|
|||||||
}
|
}
|
||||||
|
|
||||||
bool furi_hal_subghz_is_async_tx_complete() {
|
bool furi_hal_subghz_is_async_tx_complete() {
|
||||||
return furi_hal_subghz_state == SubGhzStateAsyncTxEnd;
|
return furi_hal_subghz.state == SubGhzStateAsyncTxEnd;
|
||||||
}
|
}
|
||||||
|
|
||||||
void furi_hal_subghz_stop_async_tx() {
|
void furi_hal_subghz_stop_async_tx() {
|
||||||
furi_assert(
|
furi_assert(
|
||||||
furi_hal_subghz_state == SubGhzStateAsyncTx ||
|
furi_hal_subghz.state == SubGhzStateAsyncTx ||
|
||||||
furi_hal_subghz_state == SubGhzStateAsyncTxLast ||
|
furi_hal_subghz.state == SubGhzStateAsyncTxLast ||
|
||||||
furi_hal_subghz_state == SubGhzStateAsyncTxEnd);
|
furi_hal_subghz.state == SubGhzStateAsyncTxEnd);
|
||||||
|
|
||||||
// Shutdown radio
|
// Shutdown radio
|
||||||
furi_hal_subghz_idle();
|
furi_hal_subghz_idle();
|
||||||
@ -976,5 +685,5 @@ void furi_hal_subghz_stop_async_tx() {
|
|||||||
(double)furi_hal_subghz_async_tx.duty_low,
|
(double)furi_hal_subghz_async_tx.duty_low,
|
||||||
(double)duty_cycle);
|
(double)duty_cycle);
|
||||||
|
|
||||||
furi_hal_subghz_state = SubGhzStateIdle;
|
furi_hal_subghz.state = SubGhzStateIdle;
|
||||||
}
|
}
|
||||||
|
|||||||
314
firmware/targets/f7/furi_hal/furi_hal_subghz_configs.h
Normal file
314
firmware/targets/f7/furi_hal/furi_hal_subghz_configs.h
Normal file
@ -0,0 +1,314 @@
|
|||||||
|
#pragma once
|
||||||
|
|
||||||
|
#include <cc1101.h>
|
||||||
|
|
||||||
|
static const uint8_t furi_hal_subghz_preset_ook_270khz_async_regs[][2] = {
|
||||||
|
// https://e2e.ti.com/support/wireless-connectivity/sub-1-ghz-group/sub-1-ghz/f/sub-1-ghz-forum/382066/cc1101---don-t-know-the-correct-registers-configuration
|
||||||
|
|
||||||
|
/* GPIO GD0 */
|
||||||
|
{CC1101_IOCFG0, 0x0D}, // GD0 as async serial data output/input
|
||||||
|
|
||||||
|
/* FIFO and internals */
|
||||||
|
{CC1101_FIFOTHR, 0x47}, // The only important bit is ADC_RETENTION, FIFO Tx=33 Rx=32
|
||||||
|
|
||||||
|
/* Packet engine */
|
||||||
|
{CC1101_PKTCTRL0, 0x32}, // Async, continious, no whitening
|
||||||
|
|
||||||
|
/* Frequency Synthesizer Control */
|
||||||
|
{CC1101_FSCTRL1, 0x06}, // IF = (26*10^6) / (2^10) * 0x06 = 152343.75Hz
|
||||||
|
|
||||||
|
// Modem Configuration
|
||||||
|
{CC1101_MDMCFG0, 0x00}, // Channel spacing is 25kHz
|
||||||
|
{CC1101_MDMCFG1, 0x00}, // Channel spacing is 25kHz
|
||||||
|
{CC1101_MDMCFG2, 0x30}, // Format ASK/OOK, No preamble/sync
|
||||||
|
{CC1101_MDMCFG3, 0x32}, // Data rate is 3.79372 kBaud
|
||||||
|
{CC1101_MDMCFG4, 0x67}, // Rx BW filter is 270.833333kHz
|
||||||
|
|
||||||
|
/* Main Radio Control State Machine */
|
||||||
|
{CC1101_MCSM0, 0x18}, // Autocalibrate on idle-to-rx/tx, PO_TIMEOUT is 64 cycles(149-155us)
|
||||||
|
|
||||||
|
/* Frequency Offset Compensation Configuration */
|
||||||
|
{CC1101_FOCCFG,
|
||||||
|
0x18}, // no frequency offset compensation, POST_K same as PRE_K, PRE_K is 4K, GATE is off
|
||||||
|
|
||||||
|
/* Automatic Gain Control */
|
||||||
|
{CC1101_AGCCTRL0,
|
||||||
|
0x40}, // 01 - Low hysteresis, small asymmetric dead zone, medium gain; 00 - 8 samples agc; 00 - Normal AGC, 00 - 4dB boundary
|
||||||
|
{CC1101_AGCCTRL1,
|
||||||
|
0x00}, // 0; 0 - LNA 2 gain is decreased to minimum before decreasing LNA gain; 00 - Relative carrier sense threshold disabled; 0000 - RSSI to MAIN_TARGET
|
||||||
|
{CC1101_AGCCTRL2, 0x03}, // 00 - DVGA all; 000 - MAX LNA+LNA2; 011 - MAIN_TARGET 24 dB
|
||||||
|
|
||||||
|
/* Wake on radio and timeouts control */
|
||||||
|
{CC1101_WORCTRL, 0xFB}, // WOR_RES is 2^15 periods (0.91 - 0.94 s) 16.5 - 17.2 hours
|
||||||
|
|
||||||
|
/* Frontend configuration */
|
||||||
|
{CC1101_FREND0, 0x11}, // Adjusts current TX LO buffer + high is PATABLE[1]
|
||||||
|
{CC1101_FREND1, 0xB6}, //
|
||||||
|
|
||||||
|
/* End */
|
||||||
|
{0, 0},
|
||||||
|
};
|
||||||
|
|
||||||
|
static const uint8_t furi_hal_subghz_preset_ook_650khz_async_regs[][2] = {
|
||||||
|
// https://e2e.ti.com/support/wireless-connectivity/sub-1-ghz-group/sub-1-ghz/f/sub-1-ghz-forum/382066/cc1101---don-t-know-the-correct-registers-configuration
|
||||||
|
|
||||||
|
/* GPIO GD0 */
|
||||||
|
{CC1101_IOCFG0, 0x0D}, // GD0 as async serial data output/input
|
||||||
|
|
||||||
|
/* FIFO and internals */
|
||||||
|
{CC1101_FIFOTHR, 0x07}, // The only important bit is ADC_RETENTION
|
||||||
|
|
||||||
|
/* Packet engine */
|
||||||
|
{CC1101_PKTCTRL0, 0x32}, // Async, continious, no whitening
|
||||||
|
|
||||||
|
/* Frequency Synthesizer Control */
|
||||||
|
{CC1101_FSCTRL1, 0x06}, // IF = (26*10^6) / (2^10) * 0x06 = 152343.75Hz
|
||||||
|
|
||||||
|
// Modem Configuration
|
||||||
|
{CC1101_MDMCFG0, 0x00}, // Channel spacing is 25kHz
|
||||||
|
{CC1101_MDMCFG1, 0x00}, // Channel spacing is 25kHz
|
||||||
|
{CC1101_MDMCFG2, 0x30}, // Format ASK/OOK, No preamble/sync
|
||||||
|
{CC1101_MDMCFG3, 0x32}, // Data rate is 3.79372 kBaud
|
||||||
|
{CC1101_MDMCFG4, 0x17}, // Rx BW filter is 650.000kHz
|
||||||
|
|
||||||
|
/* Main Radio Control State Machine */
|
||||||
|
{CC1101_MCSM0, 0x18}, // Autocalibrate on idle-to-rx/tx, PO_TIMEOUT is 64 cycles(149-155us)
|
||||||
|
|
||||||
|
/* Frequency Offset Compensation Configuration */
|
||||||
|
{CC1101_FOCCFG,
|
||||||
|
0x18}, // no frequency offset compensation, POST_K same as PRE_K, PRE_K is 4K, GATE is off
|
||||||
|
|
||||||
|
/* Automatic Gain Control */
|
||||||
|
// {CC1101_AGCTRL0,0x40}, // 01 - Low hysteresis, small asymmetric dead zone, medium gain; 00 - 8 samples agc; 00 - Normal AGC, 00 - 4dB boundary
|
||||||
|
// {CC1101_AGCTRL1,0x00}, // 0; 0 - LNA 2 gain is decreased to minimum before decreasing LNA gain; 00 - Relative carrier sense threshold disabled; 0000 - RSSI to MAIN_TARGET
|
||||||
|
// {CC1101_AGCCTRL2, 0x03}, // 00 - DVGA all; 000 - MAX LNA+LNA2; 011 - MAIN_TARGET 24 dB
|
||||||
|
//MAGN_TARGET for RX filter BW =< 100 kHz is 0x3. For higher RX filter BW's MAGN_TARGET is 0x7.
|
||||||
|
{CC1101_AGCCTRL0,
|
||||||
|
0x91}, // 10 - Medium hysteresis, medium asymmetric dead zone, medium gain ; 01 - 16 samples agc; 00 - Normal AGC, 01 - 8dB boundary
|
||||||
|
{CC1101_AGCCTRL1,
|
||||||
|
0x0}, // 0; 0 - LNA 2 gain is decreased to minimum before decreasing LNA gain; 00 - Relative carrier sense threshold disabled; 0000 - RSSI to MAIN_TARGET
|
||||||
|
{CC1101_AGCCTRL2, 0x07}, // 00 - DVGA all; 000 - MAX LNA+LNA2; 111 - MAIN_TARGET 42 dB
|
||||||
|
|
||||||
|
/* Wake on radio and timeouts control */
|
||||||
|
{CC1101_WORCTRL, 0xFB}, // WOR_RES is 2^15 periods (0.91 - 0.94 s) 16.5 - 17.2 hours
|
||||||
|
|
||||||
|
/* Frontend configuration */
|
||||||
|
{CC1101_FREND0, 0x11}, // Adjusts current TX LO buffer + high is PATABLE[1]
|
||||||
|
{CC1101_FREND1, 0xB6}, //
|
||||||
|
|
||||||
|
/* End */
|
||||||
|
{0, 0},
|
||||||
|
};
|
||||||
|
|
||||||
|
static const uint8_t furi_hal_subghz_preset_2fsk_dev2_38khz_async_regs[][2] = {
|
||||||
|
|
||||||
|
/* GPIO GD0 */
|
||||||
|
{CC1101_IOCFG0, 0x0D}, // GD0 as async serial data output/input
|
||||||
|
|
||||||
|
/* Frequency Synthesizer Control */
|
||||||
|
{CC1101_FSCTRL1, 0x06}, // IF = (26*10^6) / (2^10) * 0x06 = 152343.75Hz
|
||||||
|
|
||||||
|
/* Packet engine */
|
||||||
|
{CC1101_PKTCTRL0, 0x32}, // Async, continious, no whitening
|
||||||
|
{CC1101_PKTCTRL1, 0x04},
|
||||||
|
|
||||||
|
// // Modem Configuration
|
||||||
|
{CC1101_MDMCFG0, 0x00},
|
||||||
|
{CC1101_MDMCFG1, 0x02},
|
||||||
|
{CC1101_MDMCFG2, 0x04}, // Format 2-FSK/FM, No preamble/sync, Disable (current optimized)
|
||||||
|
{CC1101_MDMCFG3, 0x83}, // Data rate is 4.79794 kBaud
|
||||||
|
{CC1101_MDMCFG4, 0x67}, //Rx BW filter is 270.833333 kHz
|
||||||
|
{CC1101_DEVIATN, 0x04}, //Deviation 2.380371 kHz
|
||||||
|
|
||||||
|
/* Main Radio Control State Machine */
|
||||||
|
{CC1101_MCSM0, 0x18}, // Autocalibrate on idle-to-rx/tx, PO_TIMEOUT is 64 cycles(149-155us)
|
||||||
|
|
||||||
|
/* Frequency Offset Compensation Configuration */
|
||||||
|
{CC1101_FOCCFG,
|
||||||
|
0x16}, // no frequency offset compensation, POST_K same as PRE_K, PRE_K is 4K, GATE is off
|
||||||
|
|
||||||
|
/* Automatic Gain Control */
|
||||||
|
{CC1101_AGCCTRL0,
|
||||||
|
0x91}, //10 - Medium hysteresis, medium asymmetric dead zone, medium gain ; 01 - 16 samples agc; 00 - Normal AGC, 01 - 8dB boundary
|
||||||
|
{CC1101_AGCCTRL1,
|
||||||
|
0x00}, // 0; 0 - LNA 2 gain is decreased to minimum before decreasing LNA gain; 00 - Relative carrier sense threshold disabled; 0000 - RSSI to MAIN_TARGET
|
||||||
|
{CC1101_AGCCTRL2, 0x07}, // 00 - DVGA all; 000 - MAX LNA+LNA2; 111 - MAIN_TARGET 42 dB
|
||||||
|
|
||||||
|
/* Wake on radio and timeouts control */
|
||||||
|
{CC1101_WORCTRL, 0xFB}, // WOR_RES is 2^15 periods (0.91 - 0.94 s) 16.5 - 17.2 hours
|
||||||
|
|
||||||
|
/* Frontend configuration */
|
||||||
|
{CC1101_FREND0, 0x10}, // Adjusts current TX LO buffer
|
||||||
|
{CC1101_FREND1, 0x56},
|
||||||
|
|
||||||
|
/* End */
|
||||||
|
{0, 0},
|
||||||
|
};
|
||||||
|
|
||||||
|
static const uint8_t furi_hal_subghz_preset_2fsk_dev47_6khz_async_regs[][2] = {
|
||||||
|
|
||||||
|
/* GPIO GD0 */
|
||||||
|
{CC1101_IOCFG0, 0x0D}, // GD0 as async serial data output/input
|
||||||
|
|
||||||
|
/* Frequency Synthesizer Control */
|
||||||
|
{CC1101_FSCTRL1, 0x06}, // IF = (26*10^6) / (2^10) * 0x06 = 152343.75Hz
|
||||||
|
|
||||||
|
/* Packet engine */
|
||||||
|
{CC1101_PKTCTRL0, 0x32}, // Async, continious, no whitening
|
||||||
|
{CC1101_PKTCTRL1, 0x04},
|
||||||
|
|
||||||
|
// // Modem Configuration
|
||||||
|
{CC1101_MDMCFG0, 0x00},
|
||||||
|
{CC1101_MDMCFG1, 0x02},
|
||||||
|
{CC1101_MDMCFG2, 0x04}, // Format 2-FSK/FM, No preamble/sync, Disable (current optimized)
|
||||||
|
{CC1101_MDMCFG3, 0x83}, // Data rate is 4.79794 kBaud
|
||||||
|
{CC1101_MDMCFG4, 0x67}, //Rx BW filter is 270.833333 kHz
|
||||||
|
{CC1101_DEVIATN, 0x47}, //Deviation 47.60742 kHz
|
||||||
|
|
||||||
|
/* Main Radio Control State Machine */
|
||||||
|
{CC1101_MCSM0, 0x18}, // Autocalibrate on idle-to-rx/tx, PO_TIMEOUT is 64 cycles(149-155us)
|
||||||
|
|
||||||
|
/* Frequency Offset Compensation Configuration */
|
||||||
|
{CC1101_FOCCFG,
|
||||||
|
0x16}, // no frequency offset compensation, POST_K same as PRE_K, PRE_K is 4K, GATE is off
|
||||||
|
|
||||||
|
/* Automatic Gain Control */
|
||||||
|
{CC1101_AGCCTRL0,
|
||||||
|
0x91}, //10 - Medium hysteresis, medium asymmetric dead zone, medium gain ; 01 - 16 samples agc; 00 - Normal AGC, 01 - 8dB boundary
|
||||||
|
{CC1101_AGCCTRL1,
|
||||||
|
0x00}, // 0; 0 - LNA 2 gain is decreased to minimum before decreasing LNA gain; 00 - Relative carrier sense threshold disabled; 0000 - RSSI to MAIN_TARGET
|
||||||
|
{CC1101_AGCCTRL2, 0x07}, // 00 - DVGA all; 000 - MAX LNA+LNA2; 111 - MAIN_TARGET 42 dB
|
||||||
|
|
||||||
|
/* Wake on radio and timeouts control */
|
||||||
|
{CC1101_WORCTRL, 0xFB}, // WOR_RES is 2^15 periods (0.91 - 0.94 s) 16.5 - 17.2 hours
|
||||||
|
|
||||||
|
/* Frontend configuration */
|
||||||
|
{CC1101_FREND0, 0x10}, // Adjusts current TX LO buffer
|
||||||
|
{CC1101_FREND1, 0x56},
|
||||||
|
|
||||||
|
/* End */
|
||||||
|
{0, 0},
|
||||||
|
};
|
||||||
|
|
||||||
|
static const uint8_t furi_hal_subghz_preset_msk_99_97kb_async_regs[][2] = {
|
||||||
|
/* GPIO GD0 */
|
||||||
|
{CC1101_IOCFG0, 0x06},
|
||||||
|
|
||||||
|
{CC1101_FIFOTHR, 0x07}, // The only important bit is ADC_RETENTION
|
||||||
|
{CC1101_SYNC1, 0x46},
|
||||||
|
{CC1101_SYNC0, 0x4C},
|
||||||
|
{CC1101_ADDR, 0x00},
|
||||||
|
{CC1101_PKTLEN, 0x00},
|
||||||
|
{CC1101_CHANNR, 0x00},
|
||||||
|
|
||||||
|
{CC1101_PKTCTRL0, 0x05},
|
||||||
|
|
||||||
|
{CC1101_FSCTRL0, 0x23},
|
||||||
|
{CC1101_FSCTRL1, 0x06},
|
||||||
|
|
||||||
|
{CC1101_MDMCFG0, 0xF8},
|
||||||
|
{CC1101_MDMCFG1, 0x22},
|
||||||
|
{CC1101_MDMCFG2, 0x72},
|
||||||
|
{CC1101_MDMCFG3, 0xF8},
|
||||||
|
{CC1101_MDMCFG4, 0x5B},
|
||||||
|
{CC1101_DEVIATN, 0x47},
|
||||||
|
|
||||||
|
{CC1101_MCSM0, 0x18},
|
||||||
|
{CC1101_FOCCFG, 0x16},
|
||||||
|
|
||||||
|
{CC1101_AGCCTRL0, 0xB2},
|
||||||
|
{CC1101_AGCCTRL1, 0x00},
|
||||||
|
{CC1101_AGCCTRL2, 0xC7},
|
||||||
|
|
||||||
|
{CC1101_FREND0, 0x10},
|
||||||
|
{CC1101_FREND1, 0x56},
|
||||||
|
|
||||||
|
{CC1101_BSCFG, 0x1C},
|
||||||
|
{CC1101_FSTEST, 0x59},
|
||||||
|
|
||||||
|
/* End */
|
||||||
|
{0, 0},
|
||||||
|
};
|
||||||
|
|
||||||
|
static const uint8_t furi_hal_subghz_preset_gfsk_9_99kb_async_regs[][2] = {
|
||||||
|
|
||||||
|
{CC1101_IOCFG0, 0x06}, //GDO0 Output Pin Configuration
|
||||||
|
{CC1101_FIFOTHR, 0x47}, //RX FIFO and TX FIFO Thresholds
|
||||||
|
|
||||||
|
//1 : CRC calculation in TX and CRC check in RX enabled,
|
||||||
|
//1 : Variable packet length mode. Packet length configured by the first byte after sync word
|
||||||
|
{CC1101_PKTCTRL0, 0x05},
|
||||||
|
|
||||||
|
{CC1101_FSCTRL1, 0x06}, //Frequency Synthesizer Control
|
||||||
|
|
||||||
|
{CC1101_SYNC1, 0x46},
|
||||||
|
{CC1101_SYNC0, 0x4C},
|
||||||
|
{CC1101_ADDR, 0x00},
|
||||||
|
{CC1101_PKTLEN, 0x00},
|
||||||
|
|
||||||
|
{CC1101_MDMCFG4, 0xC8}, //Modem Configuration 9.99
|
||||||
|
{CC1101_MDMCFG3, 0x93}, //Modem Configuration
|
||||||
|
{CC1101_MDMCFG2, 0x12}, // 2: 16/16 sync word bits detected
|
||||||
|
|
||||||
|
{CC1101_DEVIATN, 0x34}, //Deviation = 19.042969
|
||||||
|
{CC1101_MCSM0, 0x18}, //Main Radio Control State Machine Configuration
|
||||||
|
{CC1101_FOCCFG, 0x16}, //Frequency Offset Compensation Configuration
|
||||||
|
|
||||||
|
{CC1101_AGCCTRL2, 0x43}, //AGC Control
|
||||||
|
{CC1101_AGCCTRL1, 0x40},
|
||||||
|
{CC1101_AGCCTRL0, 0x91},
|
||||||
|
|
||||||
|
{CC1101_WORCTRL, 0xFB}, //Wake On Radio Control
|
||||||
|
/* End */
|
||||||
|
{0, 0},
|
||||||
|
};
|
||||||
|
|
||||||
|
static const uint8_t furi_hal_subghz_preset_ook_async_patable[8] = {
|
||||||
|
0x00,
|
||||||
|
0xC0, // 12dBm 0xC0, 10dBm 0xC5, 7dBm 0xCD, 5dBm 0x86, 0dBm 0x50, -6dBm 0x37, -10dBm 0x26, -15dBm 0x1D, -20dBm 0x17, -30dBm 0x03
|
||||||
|
0x00,
|
||||||
|
0x00,
|
||||||
|
0x00,
|
||||||
|
0x00,
|
||||||
|
0x00,
|
||||||
|
0x00};
|
||||||
|
|
||||||
|
static const uint8_t furi_hal_subghz_preset_ook_async_patable_au[8] = {
|
||||||
|
0x00,
|
||||||
|
0x37, // 12dBm 0xC0, 10dBm 0xC5, 7dBm 0xCD, 5dBm 0x86, 0dBm 0x50, -6dBm 0x37, -10dBm 0x26, -15dBm 0x1D, -20dBm 0x17, -30dBm 0x03
|
||||||
|
0x00,
|
||||||
|
0x00,
|
||||||
|
0x00,
|
||||||
|
0x00,
|
||||||
|
0x00,
|
||||||
|
0x00};
|
||||||
|
|
||||||
|
static const uint8_t furi_hal_subghz_preset_2fsk_async_patable[8] = {
|
||||||
|
0xC0, // 10dBm 0xC0, 7dBm 0xC8, 5dBm 0x84, 0dBm 0x60, -10dBm 0x34, -15dBm 0x1D, -20dBm 0x0E, -30dBm 0x12
|
||||||
|
0x00,
|
||||||
|
0x00,
|
||||||
|
0x00,
|
||||||
|
0x00,
|
||||||
|
0x00,
|
||||||
|
0x00,
|
||||||
|
0x00};
|
||||||
|
|
||||||
|
static const uint8_t furi_hal_subghz_preset_msk_async_patable[8] = {
|
||||||
|
0xC0, // 10dBm 0xC0, 7dBm 0xC8, 5dBm 0x84, 0dBm 0x60, -10dBm 0x34, -15dBm 0x1D, -20dBm 0x0E, -30dBm 0x12
|
||||||
|
0x00,
|
||||||
|
0x00,
|
||||||
|
0x00,
|
||||||
|
0x00,
|
||||||
|
0x00,
|
||||||
|
0x00,
|
||||||
|
0x00};
|
||||||
|
|
||||||
|
static const uint8_t furi_hal_subghz_preset_gfsk_async_patable[8] = {
|
||||||
|
0xC0, // 10dBm 0xC0, 7dBm 0xC8, 5dBm 0x84, 0dBm 0x60, -10dBm 0x34, -15dBm 0x1D, -20dBm 0x0E, -30dBm 0x12
|
||||||
|
0x00,
|
||||||
|
0x00,
|
||||||
|
0x00,
|
||||||
|
0x00,
|
||||||
|
0x00,
|
||||||
|
0x00,
|
||||||
|
0x00};
|
||||||
Loading…
x
Reference in New Issue
Block a user