76e3fd3060
* Firmware, Bootloader: add f3 target. Refactor code to be portable across targets. * Firmware: remove bkpt * Makefile: debug agent. Debug: f3 platform throw openocd. * freertos-openocd helper * separate hal resources * return of input_dump app * using hew target resources abstration layer for backlight and blink * dirty hack for input driver, f3 has no charging pin * worked input interrupts * working display * F3: switch to 32mHz resonator * F3: configure SD_CS pin * NFC: port to F3. * fat uart app * sd card hal api * separate CC1101 spi config * faster spi gpio for sd card * Assets: disable LFS * Cube: disable css on LSE * Input: format code * Make: add bootloader source code to formatting rule * F3: enable rf by default, adjust clock settings, map all pins where they should be. * libs for coreglitch_demo_0 * nvic priority * bus clocks all to 64 * lf-rfid timer and pin * irda * ir rx setup * tim2 irq handler * Makefile: environment aware mkdir * Makefile, Irukagotchi: commit seq number. * split falling and rising ir rx events * Makefile: proper git branch detect on old git. Firmware: api fix. * fix irda * Makefile,Irukagotchi: date timestamp. * NFC: adjust SPI speed * Irukagotchi: format code * Make: add blackmagic debug in host mode * Makefile: detach blackmagic from terminal signals * Makefile,Irukagotchi: stamp target * add F3 bootloader/firmware to CI Co-authored-by: Aleksandr Kutuzov <aku@plooks.com> Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com> Co-authored-by: aanper <mail@s3f.ru>
358 lines
13 KiB
C
358 lines
13 KiB
C
/**
|
|
******************************************************************************
|
|
* @file system_stm32wbxx.c
|
|
* @author MCD Application Team
|
|
* @brief CMSIS Cortex Device Peripheral Access Layer System Source File
|
|
*
|
|
* This file provides two functions and one global variable to be called from
|
|
* user application:
|
|
* - SystemInit(): This function is called at startup just after reset and
|
|
* before branch to main program. This call is made inside
|
|
* the "startup_stm32wbxx.s" file.
|
|
*
|
|
* - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
|
|
* by the user application to setup the SysTick
|
|
* timer or configure other parameters.
|
|
*
|
|
* - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
|
|
* be called whenever the core clock is changed
|
|
* during program execution.
|
|
*
|
|
* After each device reset the MSI (4 MHz) is used as system clock source.
|
|
* Then SystemInit() function is called, in "startup_stm32wbxx.s" file, to
|
|
* configure the system clock before to branch to main program.
|
|
*
|
|
* This file configures the system clock as follows:
|
|
*=============================================================================
|
|
*-----------------------------------------------------------------------------
|
|
* System Clock source | MSI
|
|
*-----------------------------------------------------------------------------
|
|
* SYSCLK(Hz) | 4000000
|
|
*-----------------------------------------------------------------------------
|
|
* HCLK(Hz) | 4000000
|
|
*-----------------------------------------------------------------------------
|
|
* AHB Prescaler | 1
|
|
*-----------------------------------------------------------------------------
|
|
* APB1 Prescaler | 1
|
|
*-----------------------------------------------------------------------------
|
|
* APB2 Prescaler | 1
|
|
*-----------------------------------------------------------------------------
|
|
* PLL_M | 1
|
|
*-----------------------------------------------------------------------------
|
|
* PLL_N | 8
|
|
*-----------------------------------------------------------------------------
|
|
* PLL_P | 7
|
|
*-----------------------------------------------------------------------------
|
|
* PLL_Q | 2
|
|
*-----------------------------------------------------------------------------
|
|
* PLL_R | 2
|
|
*-----------------------------------------------------------------------------
|
|
* PLLSAI1_P | NA
|
|
*-----------------------------------------------------------------------------
|
|
* PLLSAI1_Q | NA
|
|
*-----------------------------------------------------------------------------
|
|
* PLLSAI1_R | NA
|
|
*-----------------------------------------------------------------------------
|
|
* Require 48MHz for USB OTG FS, | Disabled
|
|
* SDIO and RNG clock |
|
|
*-----------------------------------------------------------------------------
|
|
*=============================================================================
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
|
* All rights reserved.</center></h2>
|
|
*
|
|
* This software component is licensed by ST under BSD 3-Clause license,
|
|
* the "License"; You may not use this file except in compliance with the
|
|
* License. You may obtain a copy of the License at:
|
|
* opensource.org/licenses/BSD-3-Clause
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/** @addtogroup CMSIS
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup stm32WBxx_system
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup stm32WBxx_System_Private_Includes
|
|
* @{
|
|
*/
|
|
|
|
#include "stm32wbxx.h"
|
|
|
|
#if !defined (HSE_VALUE)
|
|
#define HSE_VALUE (32000000UL) /*!< Value of the External oscillator in Hz */
|
|
#endif /* HSE_VALUE */
|
|
|
|
#if !defined (MSI_VALUE)
|
|
#define MSI_VALUE (4000000UL) /*!< Value of the Internal oscillator in Hz*/
|
|
#endif /* MSI_VALUE */
|
|
|
|
#if !defined (HSI_VALUE)
|
|
#define HSI_VALUE (16000000UL) /*!< Value of the Internal oscillator in Hz*/
|
|
#endif /* HSI_VALUE */
|
|
|
|
#if !defined (LSI_VALUE)
|
|
#define LSI_VALUE (32000UL) /*!< Value of LSI in Hz*/
|
|
#endif /* LSI_VALUE */
|
|
|
|
#if !defined (LSE_VALUE)
|
|
#define LSE_VALUE (32768UL) /*!< Value of LSE in Hz*/
|
|
#endif /* LSE_VALUE */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup STM32WBxx_System_Private_TypesDefinitions
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup STM32WBxx_System_Private_Defines
|
|
* @{
|
|
*/
|
|
|
|
/*!< Uncomment the following line if you need to relocate your vector Table in
|
|
Internal SRAM. */
|
|
/* #define VECT_TAB_SRAM */
|
|
#define VECT_TAB_OFFSET OS_OFFSET /*!< Vector Table base offset field.
|
|
This value must be a multiple of 0x200. */
|
|
|
|
#define VECT_TAB_BASE_ADDRESS SRAM1_BASE /*!< Vector Table base offset field.
|
|
This value must be a multiple of 0x200. */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup STM32WBxx_System_Private_Macros
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup STM32WBxx_System_Private_Variables
|
|
* @{
|
|
*/
|
|
/* The SystemCoreClock variable is updated in three ways:
|
|
1) by calling CMSIS function SystemCoreClockUpdate()
|
|
2) by calling HAL API function HAL_RCC_GetHCLKFreq()
|
|
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
|
|
Note: If you use this function to configure the system clock; then there
|
|
is no need to call the 2 first functions listed above, since SystemCoreClock
|
|
variable is updated automatically.
|
|
*/
|
|
uint32_t SystemCoreClock = 4000000UL ; /*CPU1: M4 on MSI clock after startup (4MHz)*/
|
|
|
|
const uint32_t AHBPrescTable[16UL] = {1UL, 3UL, 5UL, 1UL, 1UL, 6UL, 10UL, 32UL, 2UL, 4UL, 8UL, 16UL, 64UL, 128UL, 256UL, 512UL};
|
|
|
|
const uint32_t APBPrescTable[8UL] = {0UL, 0UL, 0UL, 0UL, 1UL, 2UL, 3UL, 4UL};
|
|
|
|
const uint32_t MSIRangeTable[16UL] = {100000UL, 200000UL, 400000UL, 800000UL, 1000000UL, 2000000UL, \
|
|
4000000UL, 8000000UL, 16000000UL, 24000000UL, 32000000UL, 48000000UL, 0UL, 0UL, 0UL, 0UL}; /* 0UL values are incorrect cases */
|
|
|
|
#if defined(STM32WB55xx) || defined(STM32WB5Mxx) || defined(STM32WB35xx)
|
|
const uint32_t SmpsPrescalerTable[4UL][6UL]={{1UL,3UL,2UL,2UL,1UL,2UL}, \
|
|
{2UL,6UL,4UL,3UL,2UL,4UL}, \
|
|
{4UL,12UL,8UL,6UL,4UL,8UL}, \
|
|
{4UL,12UL,8UL,6UL,4UL,8UL}};
|
|
#endif
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup STM32WBxx_System_Private_FunctionPrototypes
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup STM32WBxx_System_Private_Functions
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Setup the microcontroller system.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void SystemInit(void)
|
|
{
|
|
/* Configure the Vector Table location add offset address ------------------*/
|
|
#if defined(VECT_TAB_SRAM) && defined(VECT_TAB_BASE_ADDRESS)
|
|
/* program in SRAMx */
|
|
SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAMx for CPU1 */
|
|
#else /* program in FLASH */
|
|
SCB->VTOR = VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
|
|
#endif
|
|
|
|
/* FPU settings ------------------------------------------------------------*/
|
|
#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
|
|
SCB->CPACR |= ((3UL << (10UL*2UL))|(3UL << (11UL*2UL))); /* set CP10 and CP11 Full Access */
|
|
#endif
|
|
|
|
/* Reset the RCC clock configuration to the default reset state ------------*/
|
|
/* Set MSION bit */
|
|
RCC->CR |= RCC_CR_MSION;
|
|
|
|
/* Reset CFGR register */
|
|
RCC->CFGR = 0x00070000U;
|
|
|
|
/* Reset PLLSAI1ON, PLLON, HSECSSON, HSEON, HSION, and MSIPLLON bits */
|
|
RCC->CR &= (uint32_t)0xFAF6FEFBU;
|
|
|
|
/*!< Reset LSI1 and LSI2 bits */
|
|
RCC->CSR &= (uint32_t)0xFFFFFFFAU;
|
|
|
|
/*!< Reset HSI48ON bit */
|
|
RCC->CRRCR &= (uint32_t)0xFFFFFFFEU;
|
|
|
|
/* Reset PLLCFGR register */
|
|
RCC->PLLCFGR = 0x22041000U;
|
|
|
|
#if defined(STM32WB55xx) || defined(STM32WB5Mxx)
|
|
/* Reset PLLSAI1CFGR register */
|
|
RCC->PLLSAI1CFGR = 0x22041000U;
|
|
#endif
|
|
|
|
/* Reset HSEBYP bit */
|
|
RCC->CR &= 0xFFFBFFFFU;
|
|
|
|
/* Disable all interrupts */
|
|
RCC->CIER = 0x00000000;
|
|
}
|
|
|
|
/**
|
|
* @brief Update SystemCoreClock variable according to Clock Register Values.
|
|
* The SystemCoreClock variable contains the core clock (HCLK), it can
|
|
* be used by the user application to setup the SysTick timer or configure
|
|
* other parameters.
|
|
*
|
|
* @note Each time the core clock (HCLK) changes, this function must be called
|
|
* to update SystemCoreClock variable value. Otherwise, any configuration
|
|
* based on this variable will be incorrect.
|
|
*
|
|
* @note - The system frequency computed by this function is not the real
|
|
* frequency in the chip. It is calculated based on the predefined
|
|
* constant and the selected clock source:
|
|
*
|
|
* - If SYSCLK source is MSI, SystemCoreClock will contain the MSI_VALUE(*)
|
|
*
|
|
* - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**)
|
|
*
|
|
* - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***)
|
|
*
|
|
* - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(***)
|
|
* or HSI_VALUE(*) or MSI_VALUE(*) multiplied/divided by the PLL factors.
|
|
*
|
|
* (*) MSI_VALUE is a constant defined in stm32wbxx_hal.h file (default value
|
|
* 4 MHz) but the real value may vary depending on the variations
|
|
* in voltage and temperature.
|
|
*
|
|
* (**) HSI_VALUE is a constant defined in stm32wbxx_hal_conf.h file (default value
|
|
* 16 MHz) but the real value may vary depending on the variations
|
|
* in voltage and temperature.
|
|
*
|
|
* (***) HSE_VALUE is a constant defined in stm32wbxx_hal_conf.h file (default value
|
|
* 32 MHz), user has to ensure that HSE_VALUE is same as the real
|
|
* frequency of the crystal used. Otherwise, this function may
|
|
* have wrong result.
|
|
*
|
|
* - The result of this function could be not correct when using fractional
|
|
* value for HSE crystal.
|
|
*
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void SystemCoreClockUpdate(void)
|
|
{
|
|
uint32_t tmp, msirange, pllvco, pllr, pllsource , pllm;
|
|
|
|
/* Get MSI Range frequency--------------------------------------------------*/
|
|
|
|
/*MSI frequency range in Hz*/
|
|
msirange = MSIRangeTable[(RCC->CR & RCC_CR_MSIRANGE) >> RCC_CR_MSIRANGE_Pos];
|
|
|
|
/* Get SYSCLK source -------------------------------------------------------*/
|
|
switch (RCC->CFGR & RCC_CFGR_SWS)
|
|
{
|
|
case 0x00: /* MSI used as system clock source */
|
|
SystemCoreClock = msirange;
|
|
break;
|
|
|
|
case 0x04: /* HSI used as system clock source */
|
|
/* HSI used as system clock source */
|
|
SystemCoreClock = HSI_VALUE;
|
|
break;
|
|
|
|
case 0x08: /* HSE used as system clock source */
|
|
SystemCoreClock = HSE_VALUE;
|
|
break;
|
|
|
|
case 0x0C: /* PLL used as system clock source */
|
|
/* PLL_VCO = (HSE_VALUE or HSI_VALUE or MSI_VALUE/ PLLM) * PLLN
|
|
SYSCLK = PLL_VCO / PLLR
|
|
*/
|
|
pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC);
|
|
pllm = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1UL ;
|
|
|
|
if(pllsource == 0x02UL) /* HSI used as PLL clock source */
|
|
{
|
|
pllvco = (HSI_VALUE / pllm);
|
|
}
|
|
else if(pllsource == 0x03UL) /* HSE used as PLL clock source */
|
|
{
|
|
pllvco = (HSE_VALUE / pllm);
|
|
}
|
|
else /* MSI used as PLL clock source */
|
|
{
|
|
pllvco = (msirange / pllm);
|
|
}
|
|
|
|
pllvco = pllvco * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos);
|
|
pllr = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> RCC_PLLCFGR_PLLR_Pos) + 1UL);
|
|
|
|
SystemCoreClock = pllvco/pllr;
|
|
break;
|
|
|
|
default:
|
|
SystemCoreClock = msirange;
|
|
break;
|
|
}
|
|
|
|
/* Compute HCLK clock frequency --------------------------------------------*/
|
|
/* Get HCLK1 prescaler */
|
|
tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos)];
|
|
/* HCLK clock frequency */
|
|
SystemCoreClock = SystemCoreClock / tmp;
|
|
|
|
}
|
|
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|