mount/flipperzero-firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
flipperzero-firmware/applications/applications.c
Georgii Surkov 01434265f6
[FL-2399, FL-2261] Tickless sleep shenanigans (#1168) 
* Disable USART in sleep
* Restore UART state on suspend/resume
* FuriHal: Enable stop mode and add insomnia to I2C and SPI
* Remove IDLE interrupt
* FuriHal: add FPU isr and disable all FPU interrupt, add core2 stop mode configuration on deep sleep
* FuriHal: tie stop mode debug with debug rtc flag
* FuriHal: adjust flash latency on clock switch, tie mcu debug with RTC debug flag
* FuriHal: move resource init to early stage
* Add EXTI pending check, enable debug traps with compile-time flag
* Wrap sleep debug functions in conditional compilation
* Remove erroneous changed
* Do not use CSS, remove it from everywhere
* Enable/disable USB on VBUS connect (prototype)
* FuriHal: add LPMS and DEEPSLEEP magic, workaround state inconsistency between cores
* FuriHal: honor c1 LMPS
* USB mode switch fix
* Applications: add flags and insomnia bypass system
* Correct spelling
* FuriHal: cleanup insomnia usage, reset sleep flags on wakeup, add shutdown api
* FuriHal: extra check on reinit request
* FuriHal: rename gpio_display_rst pin to gpio_display_rst_n
* FuriHal: add debug HAL
* FuriHal: add some magic to core2 reload procedure, fix issue with crash on ble keyboard exit
* FuriHal: cleanup ble glue, add BLE_GLUE_DEBUG flag
* FuriHal: ble reinit API, move os timer to LPTIM1 for deep sleep capability, shutdown that works
* FuriHal: take insomnia while shutdown
* Remove USB switch on/off on VBUS change
* Better tick skew handling
* Improve tick consistency under load
* Add USB_HP dummy IRQ handler
* Move interrupt check closer to sleep
* Clean up includes
* Re-enable Insomnia globally
* FuriHal: enable CSS
* FuriHal: remove questionable core2 clock shenanigans
* FuriHal: use core1 RCC registers in idle timer config
* FuriHal: return back CSS handlers, add lptim isr dispatching

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
Co-authored-by: nminaylov <nm29719@gmail.com>
2022-04-29 16:29:51 +03:00

553 lines
12 KiB
C
Raw Blame History

#include "applications.h"
#include <assets_icons.h>
// Services
extern int32_t rpc_srv(void* p);
extern int32_t bt_srv(void* p);
extern int32_t cli_srv(void* p);
extern int32_t dialogs_srv(void* p);
extern int32_t dolphin_srv(void* p);
extern int32_t gui_srv(void* p);
extern int32_t input_srv(void* p);
extern int32_t loader_srv(void* p);
extern int32_t notification_srv(void* p);
extern int32_t power_srv(void* p);
extern int32_t storage_srv(void* p);
extern int32_t desktop_srv(void* p);
extern int32_t updater_srv(void* p);
// Apps
extern int32_t accessor_app(void* p);
extern int32_t archive_app(void* p);
extern int32_t bad_usb_app(void* p);
extern int32_t u2f_app(void* p);
extern int32_t uart_echo_app(void* p);
extern int32_t blink_test_app(void* p);
extern int32_t bt_debug_app(void* p);
extern int32_t delay_test_app(void* p);
extern int32_t display_test_app(void* p);
extern int32_t gpio_app(void* p);
extern int32_t ibutton_app(void* p);
extern int32_t infrared_app(void* p);
extern int32_t infrared_monitor_app(void* p);
extern int32_t keypad_test_app(void* p);
extern int32_t lfrfid_app(void* p);
extern int32_t lfrfid_debug_app(void* p);
extern int32_t nfc_app(void* p);
extern int32_t passport_app(void* p);
extern int32_t scened_app(void* p);
extern int32_t storage_test_app(void* p);
extern int32_t subghz_app(void* p);
extern int32_t usb_mouse_app(void* p);
extern int32_t usb_test_app(void* p);
extern int32_t vibro_test_app(void* p);
extern int32_t bt_hid_app(void* p);
extern int32_t battery_test_app(void* p);
extern int32_t text_box_test_app(void* p);
// Plugins
extern int32_t music_player_app(void* p);
extern int32_t snake_game_app(void* p);
// On system start hooks declaration
extern void bt_on_system_start();
extern void crypto_on_system_start();
extern void ibutton_on_system_start();
extern void infrared_on_system_start();
extern void lfrfid_on_system_start();
extern void nfc_on_system_start();
extern void storage_on_system_start();
extern void subghz_on_system_start();
extern void power_on_system_start();
extern void unit_tests_on_system_start();
extern void updater_on_system_start();
// Settings
extern int32_t notification_settings_app(void* p);
extern int32_t storage_settings_app(void* p);
extern int32_t bt_settings_app(void* p);
extern int32_t desktop_settings_app(void* p);
extern int32_t about_settings_app(void* p);
extern int32_t power_settings_app(void* p);
extern int32_t system_settings_app(void* p);
const FlipperApplication FLIPPER_SERVICES[] = {
/* Services */
#ifdef SRV_RPC
{.app = rpc_srv,
.name = "RpcSrv",
.stack_size = 1024 * 4,
.icon = NULL,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef SRV_BT
{.app = bt_srv,
.name = "BtSrv",
.stack_size = 1024,
.icon = NULL,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef SRV_CLI
{.app = cli_srv,
.name = "CliSrv",
.stack_size = 4096,
.icon = NULL,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef SRV_DIALOGS
{.app = dialogs_srv,
.name = "DialogsSrv",
.stack_size = 1024,
.icon = NULL,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef SRV_DOLPHIN
{.app = dolphin_srv,
.name = "DolphinSrv",
.stack_size = 1024,
.icon = NULL,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef SRV_DESKTOP
#ifdef SRV_UPDATER
#error SRV_UPDATER and SRV_DESKTOP are mutually exclusive!
#endif
{.app = desktop_srv,
.name = "DesktopSrv",
.stack_size = 2048,
.icon = NULL,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef SRV_GUI
{.app = gui_srv,
.name = "GuiSrv",
.stack_size = 2048,
.icon = NULL,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef SRV_INPUT
{.app = input_srv,
.name = "InputSrv",
.stack_size = 1024,
.icon = NULL,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef SRV_LOADER
{.app = loader_srv,
.name = "LoaderSrv",
.stack_size = 1024,
.icon = NULL,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef SRV_NOTIFICATION
{.app = notification_srv,
.name = "NotificationSrv",
.stack_size = 1536,
.icon = NULL,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef SRV_POWER
{.app = power_srv,
.name = "PowerSrv",
.stack_size = 1024,
.icon = NULL,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef SRV_STORAGE
{.app = storage_srv,
.name = "StorageSrv",
.stack_size = 3072,
.icon = NULL,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef SRV_UPDATER
#ifdef SRV_DESKTOP
#error SRV_UPDATER and SRV_DESKTOP are mutually exclusive!
#endif
{.app = updater_srv,
.name = "UpdaterSrv",
.stack_size = 2048,
.icon = NULL,
.flags = FlipperApplicationFlagDefault},
#endif
};
const size_t FLIPPER_SERVICES_COUNT = COUNT_OF(FLIPPER_SERVICES);
const FlipperApplication FLIPPER_SYSTEM_APPS[] = {
#ifdef APP_UPDATER
#ifdef SRV_UPDATER
#error APP_UPDATER and SRV_UPDATER are mutually exclusive!
#endif
{.app = updater_srv,
.name = "UpdaterApp",
.stack_size = 2048,
.icon = NULL,
.flags = FlipperApplicationFlagDefault},
#endif
};
const size_t FLIPPER_SYSTEM_APPS_COUNT = COUNT_OF(FLIPPER_SYSTEM_APPS);
// Main menu APP
const FlipperApplication FLIPPER_APPS[] = {
#ifdef APP_SUBGHZ
{.app = subghz_app,
.name = "Sub-GHz",
.stack_size = 2048,
.icon = &A_Sub1ghz_14,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef APP_LF_RFID
{.app = lfrfid_app,
.name = "125 kHz RFID",
.stack_size = 2048,
.icon = &A_125khz_14,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef APP_NFC
{.app = nfc_app,
.name = "NFC",
.stack_size = 4096,
.icon = &A_NFC_14,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef APP_INFRARED
{.app = infrared_app,
.name = "Infrared",
.stack_size = 1024 * 3,
.icon = &A_Infrared_14,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef APP_GPIO
{.app = gpio_app,
.name = "GPIO",
.stack_size = 1024,
.icon = &A_GPIO_14,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef APP_IBUTTON
{.app = ibutton_app,
.name = "iButton",
.stack_size = 2048,
.icon = &A_iButton_14,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef APP_BAD_USB
{.app = bad_usb_app,
.name = "Bad USB",
.stack_size = 2048,
.icon = &A_BadUsb_14,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef APP_U2F
{.app = u2f_app,
.name = "U2F",
.stack_size = 2048,
.icon = &A_U2F_14,
.flags = FlipperApplicationFlagDefault},
#endif
};
const size_t FLIPPER_APPS_COUNT = COUNT_OF(FLIPPER_APPS);
// On system start hooks
const FlipperOnStartHook FLIPPER_ON_SYSTEM_START[] = {
crypto_on_system_start,
#ifdef APP_INFRARED
infrared_on_system_start,
#endif
#ifdef APP_NFC
nfc_on_system_start,
#endif
#ifdef APP_SUBGHZ
subghz_on_system_start,
#endif
#ifdef APP_LF_RFID
lfrfid_on_system_start,
#endif
#ifdef APP_IBUTTON
ibutton_on_system_start,
#endif
#ifdef SRV_BT
bt_on_system_start,
#endif
#ifdef SRV_POWER
power_on_system_start,
#endif
#ifdef SRV_STORAGE
storage_on_system_start,
#endif
#ifdef APP_UNIT_TESTS
unit_tests_on_system_start,
#endif
#ifdef APP_UPDATER
updater_on_system_start,
#endif
};
const size_t FLIPPER_ON_SYSTEM_START_COUNT = COUNT_OF(FLIPPER_ON_SYSTEM_START);
// Plugin menu
const FlipperApplication FLIPPER_PLUGINS[] = {
#ifdef APP_BLE_HID
{.app = bt_hid_app,
.name = "Bluetooth Remote",
.stack_size = 1024,
.icon = NULL,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef APP_MUSIC_PLAYER
{.app = music_player_app,
.name = "Music Player",
.stack_size = 1024,
.icon = &A_Plugins_14,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef APP_SNAKE_GAME
{.app = snake_game_app,
.name = "Snake Game",
.stack_size = 1024,
.icon = &A_Plugins_14,
.flags = FlipperApplicationFlagDefault},
#endif
};
const size_t FLIPPER_PLUGINS_COUNT = COUNT_OF(FLIPPER_PLUGINS);
// Plugin menu
const FlipperApplication FLIPPER_DEBUG_APPS[] = {
#ifdef APP_BLINK
{.app = blink_test_app,
.name = "Blink Test",
.stack_size = 1024,
.icon = NULL,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef APP_VIBRO_TEST
{.app = vibro_test_app,
.name = "Vibro Test",
.stack_size = 1024,
.icon = NULL,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef APP_KEYPAD_TEST
{.app = keypad_test_app,
.name = "Keypad Test",
.stack_size = 1024,
.icon = NULL,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef APP_ACCESSOR
{.app = accessor_app,
.name = "Accessor",
.stack_size = 4096,
.icon = NULL,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef APP_USB_TEST
{.app = usb_test_app,
.name = "USB Test",
.stack_size = 1024,
.icon = NULL,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef APP_USB_MOUSE
{.app = usb_mouse_app,
.name = "USB Mouse Demo",
.stack_size = 1024,
.icon = NULL,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef APP_UART_ECHO
{.app = uart_echo_app,
.name = "Uart Echo",
.stack_size = 2048,
.icon = NULL,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef APP_INFRARED_MONITOR
{.app = infrared_monitor_app,
.name = "Infrared Monitor",
.stack_size = 1024,
.icon = NULL,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef APP_SCENED
{.app = scened_app,
.name = "Templated Scene",
.stack_size = 1024,
.icon = NULL,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef APP_LF_RFID
{.app = lfrfid_debug_app,
.name = "LF-RFID Debug",
.stack_size = 1024,
.icon = NULL,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef SRV_BT
{.app = bt_debug_app,
.name = "Bluetooth Debug",
.stack_size = 1024,
.icon = NULL,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef APP_UNIT_TESTS
{.app = delay_test_app,
.name = "Delay Test",
.stack_size = 1024,
.icon = NULL,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef APP_DISPLAY_TEST
{.app = display_test_app,
.name = "Display Test",
.stack_size = 1024,
.icon = NULL,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef APP_BATTERY_TEST
{.app = battery_test_app,
.name = "Battery Test",
.stack_size = 1024,
.icon = NULL,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef APP_TEXT_BOX_TEST
{.app = text_box_test_app,
.name = "Text Box Test",
.stack_size = 1024,
.icon = NULL,
.flags = FlipperApplicationFlagDefault},
#endif
};
const size_t FLIPPER_DEBUG_APPS_COUNT = COUNT_OF(FLIPPER_DEBUG_APPS);
#ifdef APP_ARCHIVE
const FlipperApplication FLIPPER_ARCHIVE = {
.app = archive_app,
.name = "Archive",
.stack_size = 4096,
.icon = &A_FileManager_14,
.flags = FlipperApplicationFlagDefault};
#endif
// Settings menu
const FlipperApplication FLIPPER_SETTINGS_APPS[] = {
#ifdef SRV_BT
{.app = bt_settings_app,
.name = "Bluetooth",
.stack_size = 1024,
.icon = NULL,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef SRV_NOTIFICATION
{.app = notification_settings_app,
.name = "LCD and Notifications",
.stack_size = 1024,
.icon = NULL,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef SRV_STORAGE
{.app = storage_settings_app,
.name = "Storage",
.stack_size = 2048,
.icon = NULL,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef SRV_POWER
{.app = power_settings_app,
.name = "Power",
.stack_size = 1024,
.icon = NULL,
.flags = FlipperApplicationFlagInsomniaSafe},
#endif
#ifdef SRV_DESKTOP
{.app = desktop_settings_app,
.name = "Desktop",
.stack_size = 1024,
.icon = NULL,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef APP_PASSPORT
{.app = passport_app,
.name = "Passport",
.stack_size = 1024,
.icon = NULL,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef SRV_GUI
{.app = system_settings_app,
.name = "System",
.stack_size = 1024,
.icon = NULL,
.flags = FlipperApplicationFlagDefault},
#endif
#ifdef APP_ABOUT
{.app = about_settings_app,
.name = "About",
.stack_size = 1024,
.icon = NULL,
.flags = FlipperApplicationFlagDefault},
#endif
};
const size_t FLIPPER_SETTINGS_APPS_COUNT = COUNT_OF(FLIPPER_SETTINGS_APPS);
Reference in New Issue View Git Blame Copy Permalink