* Disable USART in sleep * Restore UART state on suspend/resume * FuriHal: Enable stop mode and add insomnia to I2C and SPI * Remove IDLE interrupt * FuriHal: add FPU isr and disable all FPU interrupt, add core2 stop mode configuration on deep sleep * FuriHal: tie stop mode debug with debug rtc flag * FuriHal: adjust flash latency on clock switch, tie mcu debug with RTC debug flag * FuriHal: move resource init to early stage * Add EXTI pending check, enable debug traps with compile-time flag * Wrap sleep debug functions in conditional compilation * Remove erroneous changed * Do not use CSS, remove it from everywhere * Enable/disable USB on VBUS connect (prototype) * FuriHal: add LPMS and DEEPSLEEP magic, workaround state inconsistency between cores * FuriHal: honor c1 LMPS * USB mode switch fix * Applications: add flags and insomnia bypass system * Correct spelling * FuriHal: cleanup insomnia usage, reset sleep flags on wakeup, add shutdown api * FuriHal: extra check on reinit request * FuriHal: rename gpio_display_rst pin to gpio_display_rst_n * FuriHal: add debug HAL * FuriHal: add some magic to core2 reload procedure, fix issue with crash on ble keyboard exit * FuriHal: cleanup ble glue, add BLE_GLUE_DEBUG flag * FuriHal: ble reinit API, move os timer to LPTIM1 for deep sleep capability, shutdown that works * FuriHal: take insomnia while shutdown * Remove USB switch on/off on VBUS change * Better tick skew handling * Improve tick consistency under load * Add USB_HP dummy IRQ handler * Move interrupt check closer to sleep * Clean up includes * Re-enable Insomnia globally * FuriHal: enable CSS * FuriHal: remove questionable core2 clock shenanigans * FuriHal: use core1 RCC registers in idle timer config * FuriHal: return back CSS handlers, add lptim isr dispatching Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com> Co-authored-by: nminaylov <nm29719@gmail.com>
		
			
				
	
	
		
			262 lines
		
	
	
		
			7.9 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			262 lines
		
	
	
		
			7.9 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
#include <furi_hal_rtc.h>
 | 
						|
#include <furi_hal_light.h>
 | 
						|
#include <furi_hal_debug.h>
 | 
						|
 | 
						|
#include <stm32wbxx_ll_bus.h>
 | 
						|
#include <stm32wbxx_ll_pwr.h>
 | 
						|
#include <stm32wbxx_ll_rcc.h>
 | 
						|
#include <stm32wbxx_ll_rtc.h>
 | 
						|
#include <stm32wbxx_ll_utils.h>
 | 
						|
 | 
						|
#include <furi.h>
 | 
						|
 | 
						|
#define TAG "FuriHalRtc"
 | 
						|
 | 
						|
#define RTC_CLOCK_IS_READY() (LL_RCC_LSE_IsReady() && LL_RCC_LSI1_IsReady())
 | 
						|
 | 
						|
#define FURI_HAL_RTC_HEADER_MAGIC 0x10F1
 | 
						|
#define FURI_HAL_RTC_HEADER_VERSION 0
 | 
						|
 | 
						|
typedef struct {
 | 
						|
    uint16_t magic;
 | 
						|
    uint8_t version;
 | 
						|
    uint8_t unused;
 | 
						|
} FuriHalRtcHeader;
 | 
						|
 | 
						|
typedef struct {
 | 
						|
    uint8_t log_level : 4;
 | 
						|
    uint8_t log_reserved : 4;
 | 
						|
    uint8_t flags;
 | 
						|
    uint8_t boot_mode : 4;
 | 
						|
    uint16_t reserved : 12;
 | 
						|
} DeveloperReg;
 | 
						|
 | 
						|
_Static_assert(sizeof(DeveloperReg) == 4, "DeveloperReg size mismatch");
 | 
						|
 | 
						|
void furi_hal_rtc_init_early() {
 | 
						|
    // LSE and RTC
 | 
						|
    LL_PWR_EnableBkUpAccess();
 | 
						|
    if(!RTC_CLOCK_IS_READY()) {
 | 
						|
        LL_RCC_LSI1_Enable();
 | 
						|
        // Try to start LSE normal way
 | 
						|
        LL_RCC_LSE_SetDriveCapability(LL_RCC_LSEDRIVE_HIGH);
 | 
						|
        LL_RCC_LSE_Enable();
 | 
						|
        uint32_t c = 0;
 | 
						|
        while(!RTC_CLOCK_IS_READY() && c < 200) {
 | 
						|
            LL_mDelay(10);
 | 
						|
            c++;
 | 
						|
        }
 | 
						|
        // Plan B: reset backup domain
 | 
						|
        if(!RTC_CLOCK_IS_READY()) {
 | 
						|
            furi_hal_light_sequence("rgb R.r.R.r.R");
 | 
						|
            LL_RCC_ForceBackupDomainReset();
 | 
						|
            LL_RCC_ReleaseBackupDomainReset();
 | 
						|
            NVIC_SystemReset();
 | 
						|
        }
 | 
						|
        // Set RTC domain clock to LSE
 | 
						|
        LL_RCC_SetRTCClockSource(LL_RCC_RTC_CLKSOURCE_LSE);
 | 
						|
    }
 | 
						|
    // Enable clocking
 | 
						|
    LL_RCC_EnableRTC();
 | 
						|
    LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_RTCAPB);
 | 
						|
 | 
						|
    // Verify header register
 | 
						|
    uint32_t data_reg = furi_hal_rtc_get_register(FuriHalRtcRegisterHeader);
 | 
						|
    FuriHalRtcHeader* data = (FuriHalRtcHeader*)&data_reg;
 | 
						|
    if(data->magic != FURI_HAL_RTC_HEADER_MAGIC || data->version != FURI_HAL_RTC_HEADER_VERSION) {
 | 
						|
        // Reset all our registers to ensure consistency
 | 
						|
        for(size_t i = 0; i < FuriHalRtcRegisterMAX; i++) {
 | 
						|
            furi_hal_rtc_set_register(i, 0);
 | 
						|
        }
 | 
						|
        data->magic = FURI_HAL_RTC_HEADER_MAGIC;
 | 
						|
        data->version = FURI_HAL_RTC_HEADER_VERSION;
 | 
						|
        furi_hal_rtc_set_register(FuriHalRtcRegisterHeader, data_reg);
 | 
						|
    }
 | 
						|
 | 
						|
    if(furi_hal_rtc_is_flag_set(FuriHalRtcFlagDebug)) {
 | 
						|
        furi_hal_debug_enable();
 | 
						|
    } else {
 | 
						|
        furi_hal_debug_disable();
 | 
						|
    }
 | 
						|
}
 | 
						|
 | 
						|
void furi_hal_rtc_deinit_early() {
 | 
						|
}
 | 
						|
 | 
						|
void furi_hal_rtc_init() {
 | 
						|
    if(LL_RCC_GetRTCClockSource() != LL_RCC_RTC_CLKSOURCE_LSE) {
 | 
						|
        LL_RCC_ForceBackupDomainReset();
 | 
						|
        LL_RCC_ReleaseBackupDomainReset();
 | 
						|
        LL_RCC_SetRTCClockSource(LL_RCC_RTC_CLKSOURCE_LSE);
 | 
						|
    }
 | 
						|
 | 
						|
    LL_RCC_EnableRTC();
 | 
						|
 | 
						|
    LL_RTC_InitTypeDef RTC_InitStruct = {0};
 | 
						|
    RTC_InitStruct.HourFormat = LL_RTC_HOURFORMAT_24HOUR;
 | 
						|
    RTC_InitStruct.AsynchPrescaler = 127;
 | 
						|
    RTC_InitStruct.SynchPrescaler = 255;
 | 
						|
    LL_RTC_Init(RTC, &RTC_InitStruct);
 | 
						|
 | 
						|
    furi_log_set_level(furi_hal_rtc_get_log_level());
 | 
						|
 | 
						|
    FURI_LOG_I(TAG, "Init OK");
 | 
						|
}
 | 
						|
 | 
						|
uint32_t furi_hal_rtc_get_register(FuriHalRtcRegister reg) {
 | 
						|
    return LL_RTC_BAK_GetRegister(RTC, reg);
 | 
						|
}
 | 
						|
 | 
						|
void furi_hal_rtc_set_register(FuriHalRtcRegister reg, uint32_t value) {
 | 
						|
    LL_RTC_BAK_SetRegister(RTC, reg, value);
 | 
						|
}
 | 
						|
 | 
						|
void furi_hal_rtc_set_log_level(uint8_t level) {
 | 
						|
    uint32_t data_reg = furi_hal_rtc_get_register(FuriHalRtcRegisterSystem);
 | 
						|
    DeveloperReg* data = (DeveloperReg*)&data_reg;
 | 
						|
    data->log_level = level;
 | 
						|
    furi_hal_rtc_set_register(FuriHalRtcRegisterSystem, data_reg);
 | 
						|
    furi_log_set_level(level);
 | 
						|
}
 | 
						|
 | 
						|
uint8_t furi_hal_rtc_get_log_level() {
 | 
						|
    uint32_t data_reg = furi_hal_rtc_get_register(FuriHalRtcRegisterSystem);
 | 
						|
    DeveloperReg* data = (DeveloperReg*)&data_reg;
 | 
						|
    return data->log_level;
 | 
						|
}
 | 
						|
 | 
						|
void furi_hal_rtc_set_flag(FuriHalRtcFlag flag) {
 | 
						|
    uint32_t data_reg = furi_hal_rtc_get_register(FuriHalRtcRegisterSystem);
 | 
						|
    DeveloperReg* data = (DeveloperReg*)&data_reg;
 | 
						|
    data->flags |= flag;
 | 
						|
    furi_hal_rtc_set_register(FuriHalRtcRegisterSystem, data_reg);
 | 
						|
 | 
						|
    if(flag & FuriHalRtcFlagDebug) {
 | 
						|
        furi_hal_debug_enable();
 | 
						|
    }
 | 
						|
}
 | 
						|
 | 
						|
void furi_hal_rtc_reset_flag(FuriHalRtcFlag flag) {
 | 
						|
    uint32_t data_reg = furi_hal_rtc_get_register(FuriHalRtcRegisterSystem);
 | 
						|
    DeveloperReg* data = (DeveloperReg*)&data_reg;
 | 
						|
    data->flags &= ~flag;
 | 
						|
    furi_hal_rtc_set_register(FuriHalRtcRegisterSystem, data_reg);
 | 
						|
 | 
						|
    if(flag & FuriHalRtcFlagDebug) {
 | 
						|
        furi_hal_debug_disable();
 | 
						|
    }
 | 
						|
}
 | 
						|
 | 
						|
bool furi_hal_rtc_is_flag_set(FuriHalRtcFlag flag) {
 | 
						|
    uint32_t data_reg = furi_hal_rtc_get_register(FuriHalRtcRegisterSystem);
 | 
						|
    DeveloperReg* data = (DeveloperReg*)&data_reg;
 | 
						|
    return data->flags & flag;
 | 
						|
}
 | 
						|
 | 
						|
void furi_hal_rtc_set_boot_mode(FuriHalRtcBootMode mode) {
 | 
						|
    uint32_t data_reg = furi_hal_rtc_get_register(FuriHalRtcRegisterSystem);
 | 
						|
    DeveloperReg* data = (DeveloperReg*)&data_reg;
 | 
						|
    data->boot_mode = mode;
 | 
						|
    furi_hal_rtc_set_register(FuriHalRtcRegisterSystem, data_reg);
 | 
						|
}
 | 
						|
 | 
						|
FuriHalRtcBootMode furi_hal_rtc_get_boot_mode() {
 | 
						|
    uint32_t data_reg = furi_hal_rtc_get_register(FuriHalRtcRegisterSystem);
 | 
						|
    DeveloperReg* data = (DeveloperReg*)&data_reg;
 | 
						|
    return (FuriHalRtcBootMode)data->boot_mode;
 | 
						|
}
 | 
						|
 | 
						|
void furi_hal_rtc_set_datetime(FuriHalRtcDateTime* datetime) {
 | 
						|
    furi_assert(datetime);
 | 
						|
 | 
						|
    /* Disable write protection */
 | 
						|
    LL_RTC_DisableWriteProtection(RTC);
 | 
						|
 | 
						|
    /* Enter Initialization mode and wait for INIT flag to be set */
 | 
						|
    LL_RTC_EnableInitMode(RTC);
 | 
						|
    while(!LL_RTC_IsActiveFlag_INIT(RTC)) {
 | 
						|
    }
 | 
						|
 | 
						|
    /* Set time */
 | 
						|
    LL_RTC_TIME_Config(
 | 
						|
        RTC,
 | 
						|
        LL_RTC_TIME_FORMAT_AM_OR_24,
 | 
						|
        __LL_RTC_CONVERT_BIN2BCD(datetime->hour),
 | 
						|
        __LL_RTC_CONVERT_BIN2BCD(datetime->minute),
 | 
						|
        __LL_RTC_CONVERT_BIN2BCD(datetime->second));
 | 
						|
 | 
						|
    /* Set date */
 | 
						|
    LL_RTC_DATE_Config(
 | 
						|
        RTC,
 | 
						|
        datetime->weekday,
 | 
						|
        __LL_RTC_CONVERT_BIN2BCD(datetime->day),
 | 
						|
        __LL_RTC_CONVERT_BIN2BCD(datetime->month),
 | 
						|
        __LL_RTC_CONVERT_BIN2BCD(datetime->year - 2000));
 | 
						|
 | 
						|
    /* Exit Initialization mode */
 | 
						|
    LL_RTC_DisableInitMode(RTC);
 | 
						|
 | 
						|
    /* If RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */
 | 
						|
    if(!LL_RTC_IsShadowRegBypassEnabled(RTC)) {
 | 
						|
        LL_RTC_ClearFlag_RS(RTC);
 | 
						|
        while(!LL_RTC_IsActiveFlag_RS(RTC)) {
 | 
						|
        };
 | 
						|
    }
 | 
						|
 | 
						|
    /* Enable write protection */
 | 
						|
    LL_RTC_EnableWriteProtection(RTC);
 | 
						|
}
 | 
						|
 | 
						|
void furi_hal_rtc_get_datetime(FuriHalRtcDateTime* datetime) {
 | 
						|
    furi_assert(datetime);
 | 
						|
 | 
						|
    uint32_t time = LL_RTC_TIME_Get(RTC); // 0x00HHMMSS
 | 
						|
    uint32_t date = LL_RTC_DATE_Get(RTC); // 0xWWDDMMYY
 | 
						|
 | 
						|
    datetime->second = __LL_RTC_CONVERT_BCD2BIN((time >> 0) & 0xFF);
 | 
						|
    datetime->minute = __LL_RTC_CONVERT_BCD2BIN((time >> 8) & 0xFF);
 | 
						|
    datetime->hour = __LL_RTC_CONVERT_BCD2BIN((time >> 16) & 0xFF);
 | 
						|
    datetime->year = __LL_RTC_CONVERT_BCD2BIN((date >> 0) & 0xFF) + 2000;
 | 
						|
    datetime->month = __LL_RTC_CONVERT_BCD2BIN((date >> 8) & 0xFF);
 | 
						|
    datetime->day = __LL_RTC_CONVERT_BCD2BIN((date >> 16) & 0xFF);
 | 
						|
    datetime->weekday = __LL_RTC_CONVERT_BCD2BIN((date >> 24) & 0xFF);
 | 
						|
}
 | 
						|
 | 
						|
bool furi_hal_rtc_validate_datetime(FuriHalRtcDateTime* datetime) {
 | 
						|
    bool invalid = false;
 | 
						|
 | 
						|
    invalid |= (datetime->second > 59);
 | 
						|
    invalid |= (datetime->minute > 59);
 | 
						|
    invalid |= (datetime->hour > 23);
 | 
						|
 | 
						|
    invalid |= (datetime->year < 2000);
 | 
						|
    invalid |= (datetime->year > 2099);
 | 
						|
 | 
						|
    invalid |= (datetime->month == 0);
 | 
						|
    invalid |= (datetime->month > 12);
 | 
						|
 | 
						|
    invalid |= (datetime->day == 0);
 | 
						|
    invalid |= (datetime->day > 31);
 | 
						|
 | 
						|
    invalid |= (datetime->weekday == 0);
 | 
						|
    invalid |= (datetime->weekday > 7);
 | 
						|
 | 
						|
    return !invalid;
 | 
						|
}
 | 
						|
 | 
						|
void furi_hal_rtc_set_fault_data(uint32_t value) {
 | 
						|
    furi_hal_rtc_set_register(FuriHalRtcRegisterFaultData, value);
 | 
						|
}
 | 
						|
 | 
						|
uint32_t furi_hal_rtc_get_fault_data() {
 | 
						|
    return furi_hal_rtc_get_register(FuriHalRtcRegisterFaultData);
 | 
						|
}
 | 
						|
 | 
						|
void furi_hal_rtc_set_pin_fails(uint32_t value) {
 | 
						|
    furi_hal_rtc_set_register(FuriHalRtcRegisterPinFails, value);
 | 
						|
}
 | 
						|
 | 
						|
uint32_t furi_hal_rtc_get_pin_fails() {
 | 
						|
    return furi_hal_rtc_get_register(FuriHalRtcRegisterPinFails);
 | 
						|
}
 |